Jump to content
SAU Community

Recommended Posts

Had my AFM die on me. Boosting up a hill the power just cut out completely, it would barely idle and wouldnt rev. Fortunately i managed to limp the car home by disconnecting the AFM.

Fearing an expensive replacement was on the cards i soaked the AFM with some contact cleaner, let it sit over night and then tired it out in the morning. Amazingly the engine started up great, idled perfect and drove fantastic. In fact its driving better then ever, i went on a 100km drive this arvo with a whole bunch of blasts of the throttle. Fuel consumption is better and revving feels a lot smoother.

I'd recommend giving your AFM a clean even if its functioning well. Next weekend i'll try cleaning the wife's V35 AFM which is working fine to see if it shows an improvement

wow, thats a great result! i tried cleaning mine also when one died. good to know that is worth trying

you should probably perform an ECU reset after the clean.

Awesome.......I wouldn't bother with a second hand rocker as mostly likely would have/will warp.....I am getting a few quotes on rockers covers now..... but this is money I would rather be spending on suspension or exhaust or on my race car......

Will report back with quotes

You only need the passenger side rocker too I assume, as that is the one that always seems to leak. Funny enough it seems to be the one that fails on VQ35's also, so not just turbo heat related. Post up the prices if you can...

I just organised some carpet mats to be custom made, 4 floor mats, hump with velcro and cargo floor mat. Good pricing on them too. I got them to supply some bitumen sandwiched flock sound deadening to be glued underneath the rear luggage mat, to try and get rid of the exhaust drone, and also they will cut out for the luggage hooks in the floor so they can be removed and bolted back in, hopefully holding the mat in place nicely.

They also supplied me with the bitumen/aluminium sheets to stick to the body under the plastic trays. Should make it almost silent in the back apparently.

I might ask them for a group buy price if anyone is interested in fitted mats...

You only need the passenger side rocker too I assume, as that is the one that always seems to leak. Funny enough it seems to be the one that fails on VQ35's also, so not just turbo heat related. Post up the prices if you can...

Should have prices this arvo, will advise. Yeah drivers side is fine.

I just organised some carpet mats to be custom made, 4 floor mats, hump with velcro and cargo floor mat. Good pricing on them too. I got them to supply some bitumen sandwiched flock sound deadening to be glued underneath the rear luggage mat, to try and get rid of the exhaust drone, and also they will cut out for the luggage hooks in the floor so they can be removed and bolted back in, hopefully holding the mat in place nicely.

They also supplied me with the bitumen/aluminium sheets to stick to the body under the plastic trays. Should make it almost silent in the back apparently.

I might ask them for a group buy price if anyone is interested in fitted mats...

Keen to hear a price on the cargo area mat Scotty!

I just organised some carpet mats to be custom made, 4 floor mats, hump with velcro and cargo floor mat. Good pricing on them too. I got them to supply some bitumen sandwiched flock sound deadening to be glued underneath the rear luggage mat, to try and get rid of the exhaust drone, and also they will cut out for the luggage hooks in the floor so they can be removed and bolted back in, hopefully holding the mat in place nicely.

They also supplied me with the bitumen/aluminium sheets to stick to the body under the plastic trays. Should make it almost silent in the back apparently.

I might ask them for a group buy price if anyone is interested in fitted mats...

yep i;m in :cheers:

Ok, I will get some pics of mine when done and ask them for pricing. There are many carpet types and options they can do for us, including stitching a patch with embroidered Stagea logo, but I was happy with plain grey.

Are they similar to the factory option ones in the way they go around the seats? Also will they have a hole to stop the drivers matt from moving?

Yep, they were originally copied off some imported mats I think but they now curve around all the floor bulges and the drivers one has the hole for the clip.

The rear cargo didn't go up the back of the seat as they couldn't work out how to hold it there. I didn't want the metal clamps I have seen on the JDM mats so I left mine as only the floor.

Edit: I did tell them they could drape it over the top and have the headrest bars go through it, they could possibly do that if you wanted but I would have to go and get my car remeasured for you.

You only need the passenger side rocker too I assume, as that is the one that always seems to leak. Funny enough it seems to be the one that fails on VQ35's also, so not just turbo heat related. Post up the prices if you can...

$391.97 for a passenger side rocker cover ex-japan :wacko:

$391.97 for a passenger side rocker cover ex-japan :wacko:

Lol, yeah, that's not affordable. I haven't gone inside, but would taking the covers off, and getting some round seals cut and using a little sealant to bung it all back together?

Is that an option from people that have seen it?

Just bought a complete V35 coupe exhaust from headers to tips for the mid pipe. Had to buy the whole lot as he wouldn't separate but only cost $100. From fist look the V35 pipe is about 3mm smaller in diameter from my measurements, will confirm tomorrow. Also keen to see if the much smaller muffler will improve power/torque at all.

Yep, they were originally copied off some imported mats I think but they now curve around all the floor bulges and the drivers one has the hole for the clip.

The rear cargo didn't go up the back of the seat as they couldn't work out how to hold it there. I didn't want the metal clamps I have seen on the JDM mats so I left mine as only the floor.

Edit: I did tell them they could drape it over the top and have the headrest bars go through it, they could possibly do that if you wanted but I would have to go and get my car remeasured for you.

I'd prob just go with the floor matts, if I was to put anything in the boot it would be rubber so the dog can go in no worries :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...