Jump to content
SAU Community

Recommended Posts

My new track rims, lightweight Forged Rays (oem V35 rims I think, I haven't seen this style before) with Dunlop Direzza 036 soft compound semis. Should stick like glue. :)

post-63525-0-18565500-1349737383_thumb.jpg

post-63525-0-35562900-1349737394_thumb.jpg

^^ Sexy...

Finally finished wiring the EVC in last night, just have to finish the plumbing tonight (only have the MAP line in at the moment).

For Leon especially, and others, here are some pics of the direct 12V distribution block I setup.

post-34363-0-64824600-1349739575_thumb.jpg

That's the distribution block mounted next to the TCM. One 4GA wire in, and four wires out. Once problem I've noticed is the stock wires for the Wideband and EVC are too small to mount in here, so I have soldered in some thicker cable (the two black wires going in). You can also see the brown wire connected to the ignition power source of the TCM, which is used to switch the relay.

post-34363-0-15783900-1349739694_thumb.jpg

70A relay wired up in the battery compartment. You can see here the solid red wire, which goes to the battery, the translucent red wire, which runs to the distribution block, the translucent brown wire, which is the ground for the switching, and the brown wire running in, which is connected to the opposite side pin to the translucent brown wire.

post-34363-0-71441400-1349739811_thumb.jpg

Inline 50A glass fuse connected directly to the battery, and running to the relay in the above pic. The other red wire with the inline blade fuse is the direct feed for the fuel pump.

post-34363-0-99446700-1349739916_thumb.jpg

The end of the ground wire for the switching on the relay. Not very exciting but thought I'd throw it in anyway.

I'll post up some pics of the EVC install once it's done, hopefully I'll get the pics done tonight.

Boost controller finally in and working...

but...

In a stupid story in the vein of Dale's recent experiences, I started the car ready to go after setting up the EVC with a starting boost of 12PSI.

I put my foot down and revved the car, and next thing you know there's a bang, a puff of smoke, and a tink tink tink that scared the crap out of me.

I'm sitting here thinking "oh no, what have I done, engine go bang!" and turn it off straight away.

I rush round the front to find that one of the belts has shredded in half.

More "Oh shit", followed by a sigh of relief as I realise the smoke was a bit of belt hitting the clutch fan, and the tink noise was the left over bits of belt hitting bits of metal.

Pack it up, come inside, thinking "I can't be the only person who's had this happen, need to search the forums".

Do search.

Find three helpful threads.

One being Matt's new thread with all the part number he's found in it, including the AC and drive belts: http://www.skylinesa..._1#entry6541105

One being Justin's thread about his AC belt, with a very familiar image in it: http://www.skylinesa..._1#entry6392240

Enter sigh of relief as I read Alex's posts confirming that not only is the belt cheap and easy to replace, but I can clip it off and keep driving the car!

I love these forums...

I was initially worried it had something to do with the boost controller. Now that I know it's the AC belt it makes a bit of sense, as the AC hasn't worked since January and I figured it needed a regas.

So now I'm ordering a new drive and AC belt thanks to Matt's part numbers, cutting the AC belt thanks to Alex's help, and driving the car to AM Performance, which will be where it rests while I'm in Coffs, so Andrew can finally do the intake.

Some pics of the boost controller install will follow tomorrow, but thanks for all the help guys. Just wish that bloody actuator wasn't so difficult to get to!

Nice pick up there on the wheels Scotty. Special edition 350z wheels I believe - right out the Rays factory.

I bet they are worth a lot more than I paid. ;)

They were an option; only available on the 350Z track edition (with Brembo's), and were around $3800-$4000.

I think I've only seen 2 or 3 sets EVER; so they're pretty damn rare.

Scotty stole them cause of a hot tip off, Dale. ;)

Trading post says 1800. Seen for similar amounts in the past. Just like a proper rays wheel, without the cost.

Ryan. Alex takes no liability in what you cut off! :P

That's the awesomeness of search!

Why did you need to get to the actuator Ryan? Just to replace the hose? I would have left it and just plumbed it in where the T piece goes.

If you'd have told me that 6 hours ago thats what I would have done in hindsight!

But yeah, it was for the hose, and it worked out ok in the end, just a pain at the time.

Installed a nice yellow addition to my car,

Oh wait, that was the popo.

A dead number plate light and an apparent oil leak.. I can't see an oil leak anywhere...

So in actual fact, there's nothing really dangerously wrong with your car, but because it's different (and maybe the cop was in a shitty mood?), they decided you needed more hassles...

A dead number plate light and an apparent oil leak.. I can't see an oil leak anywhere...

So in actual fact, there's nothing really dangerously wrong with your car, but because it's different (and maybe the cop was in a shitty mood?), they decided you needed more hassles...

Oh no; haven't you heard? Non functioning numberplate lights are a leading cause of serious & fatal accidents in Australia!

:rolleyes:

Edited by Daleo

Its just discrimination- nothing new. How often do you hear about Grandmas old ford lazer being pulled over and defected for worn out brakes, oil leaks, headlight out, flogged out shocks etc etc.

I've heard of a import driver pulled over and they couldn't find anything, so they defected his handbrake for too many clicks. :wacko:

A dead number plate light and an apparent oil leak.. I can't see an oil leak anywhere...

Every time I come up for Rego-check at one of my rear number plate lights are dead. Two weeks ago it was both.

I asked why they're so fragile and the mechanic said,

a) it's the way you put your tailgate down (since it doesn't seem to happen on my GTR)

b) the filaments are more delicate than they used to be (coming from such n such a place)

Every time I come up for Rego-check at one of my rear number plate lights are dead. Two weeks ago it was both.

I asked why they're so fragile and the mechanic said,

a) it's the way you put your tailgate down (since it doesn't seem to happen on my GTR)

b) the filaments are more delicate than they used to be (coming from such n such a place)

Terry, I replaced mine with SMD versions, nice white light; so much more resistant to that kind of damage.

They cost peanuts on eBay, and last forever.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...