Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

Moving along here with some real progress thanks to clint/panik who has been working on the exh and wg plumbing. It's coming together very nicely.

Also picked up a battery from the US through NST - good pricing and prompt delivery. Should save a few kg's over the optima that was in there previously.

braille_01.jpg

The business end of the fuel system is coming together.

fuel_02.jpg

Moving along here with some real progress thanks to clint/panik who has been working on the exh and wg plumbing. It's coming together very nicely.

Is the car down at JPC? Clint needs to do some welding for me as soon as I get my shit back from the painters

Hey Corey - a good mate lent me his spare 26/30 to trial fit various bit's and pieces so I can answer you now. The manifold places the turbo higher than the motor, I have only a few mm clearance between the bonnet and comp cover (less than I have btw the motor and bonnet). The front waste gate sits pretty close to the strut tower as well. As mentioned before the gate plumbing will be fun.

rb30trial_02.jpg

rb30trial_01-1.jpg

Never say it cant be done............ :thumbsup:

Never say it cant be done............ :thumbsup:

Very nice work mate, looks pretty neat from this angle :yes:

clint_04.jpg

top build, always of the highest quality too :) i would be happy letting you work on my car with the standard of work produced! build ups always look so easy on an internet thread lol, i think it will be worth it though.

any new pics mate?

Thanks Brad - few more.

Lower gate pipe

progress_09.jpg

It's a good fit

clint_03.jpg

clint_02.jpg

Clint also added a bracket to stop it moving around now there's a flexi and remounted the muffler up higher to suit the standard rear bumper

clint_05.jpg

From fatz stockpile of carbon bits ;)

The diff mount was from z31parts but it failed in fairly dramatic fashion so I wouldn't recommend one. It was replaced with a solid mount..which reminds me I need to find solid alloy subframe bushes to replace the nolathane ones which allow the subframe to move too much.

No Worries, cheers.

Is the alloy one custom? or do you have a link to where you got it?

I get so much shudder/tramp its not funny....

The current diff mount was cut from steel equal angle into which we drilled a couple of holes :P I did some googling and z31parts have beefed up there diff mounts, the new ones look a lot more robust. I'm sticking with solid though, it's not a daily so the noise is tolerable.

Just got the dash back from flocking:

flockeddash_01.jpg

Thanks Steve. Stock rear and keeping the rest as is, would consider 31house stuff as a last resort if it looks too odd but not on the radar at the moment. The front sits nice and low which should make a front undertray fairly easy to put together. I'm trying to avoid doing anything which doesn't bring it closer to running at this stage.

Edited by DCIEVE

The uras kit hangs very low at the rear so it's effectively a big air brake.

Going to be running sensors for fuel and oil pressure through the ecu rather than the more basic pressure switch set-up to protect the engine. Not sure exactly how this will be set-up at this stage though - fuel pressure will need to be mapped vs rpm.

Sensors are 1/8 npt, this is the port for fuel pressure.

fuel_03.jpg

1/2" (8an) fuel feed line will also be added and planning to use the standard 6an return line.

fuel_04.jpg

Edited by DCIEVE

You would need to see someone who specialises in flocking, I don't believe a motor trimmer would be able to help you. Refer here for a basic description of the process (basically apply glue to the dash, earth it and spray on the material (flock) using a negative charge). http://en.wikipedia.org/wiki/Flocking_(texture)

I was charged 150 but I'm told that's on the cheap side.

  • 4 weeks later...

Well Brad Stacy did not disappoint, all the fab work is complete and to a very high standard. Just need to do all the fuel/vac/oil plumbing and then it's ready for wire and maybe one day the engine will get built (6months and counting waiting for the new head).

Some pics of Brads work (http://www.bradstacyfabrication.com.au/)

Harness bar added to the jap cage

bstacy_07.jpg

bstacy_08.jpg

Surge tank & pump mounted in the spare tyre well

bstacy_10.jpg

New bracket for the remote filter better suited to the external pump location

bstacy_05.jpg

Remounted the thermos (got rid of the plastic clamps), mounted the accusump and added a bolt in radiator support bar with secondary bonnet restraint.

bstacy_01.jpg

Tow strap for when it breaks!

bstacy_03.jpg

Intercooler pipes with greddy type r bov plumbed back. The battery tray was also removed.

bstacy_04.jpg

bstacy_12.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
    • The fact that US/JDM plates actually fit the skyline bumpers properly is a big, big thing for me as they are the correct dimensions. Annoyingly you can't opt for a normal plate (or plate combination) in that size. You have to make up your own one, and at that point you'd still know it wasn't randomly assigned. 
    • Well, really, that's any ECU, because it's not so much the ECU that the tuner connects to, but a laptop that's connected to the ECU. You have to have the tuning software installed locally. The "remote" part is essentially just remote desktop (RDP) or VNC type access. Nevertheless, if you're looking to upgrade, then you're immediately in the Haltech/Link territory, both of which can be done by any number of competent tuners here in Oz. But without a dyno, you'll definitely also need a wideband O2 sensor fitted, and you'll probably be relying on "auto" tuning a bit, where you drive it around under various loads and then apply the corrections that the ECU learns (basically applying the fuel trims that the ECU has to do to correct the mixtures). Tuning the timing is a little harder. It can be difficult to trust the old OEM knock sensors on RBs, so it is definitely best to have someone who knows what they're listening for, with knock ears (a piezo microphone connected to the engine, and and little amp and headphones so the listener can hear the angry men with hammers who live in the engine). That is more difficult to do remotely, and I suspect the only sane way is to be quite conservative on timing. But that's OK. You're probably waaaaay better off with conservative timing where you are. What is the fuel situation? 98RON available? Or low grade jungle juice?
    • I see your point, I didn't think too deep into it, was purely focused on the price. There's no bad blood between myself and GSM, they acknowledged the price was cheaper else where and at the time couldn't match it. 
×
×
  • Create New...