Jump to content
SAU Community

Recommended Posts

HKS GT2535 Full Kit for R33 RB25DET. Great condition with minimal shaft play and ready to bolt straight up to your GTS-T.

Includes turbo (duh), elbow and silicone joiner/shield, all lines, basically everything you need to swap out with your standard turbo. I'll include some new turbo to manifold bolts. An easy 250-260rwkw with supporting mods.

$1250. Pickup from 5098.

Edited by Ionos

have a set of 4 r33 gtr rims and tyres

all have been repainted in factory silver (2pac)

2 have bridgestone turanza er300s with only 1000 km on them so there like brand new

2 have bridgestone ts01s which have about 5000km ols so about 30% worn

all have centre caps

$990

pics can sent via mms iphone upon request

contact via pm or 0404 401 766

have a set of 4 r33 gtr rims and tyres

all have been repainted in factory silver (2pac)

2 have bridgestone turanza er300s with only 1000 km on them so there like brand new

2 have bridgestone ts01s which have about 5000km ols so about 30% worn

all have centre caps

$990

pics can sent via mms iphone upon request

contact via pm or 0404 401 766

SOLD

For sale

Full 3.5ich Nismo Exhaust comes with dump pipe decat pipe rear pipe and Nismo cannon

Fits All RB motor's came off skyline R33

Swap for a pair of front GTR seats

OR

R33 GTR NISMO CLUSTER 320km/h speedometer

Thanks

http://www.gumtree.com.au/s-ad/adelaide-cbd/engine-engine-parts-transmission/full-3-5ich-nismo-exhaust-came-off-r33/1004915204

Edited by MAD R33

Standard RB25DET Manifold, Good Condition $60

Top mount RB25DET Manifold, Stainless steel, 50 mm wastegate flange, Good condition $250

Kicker 300wrms mono block amp, Good condition $100

MTX Jackhammer 250wrms sub, in HUGE ported box, good condition, sounds amazing, all about the engineered box! $100

txt on 0four253sixsix58two or pm.

Cheers

Window glass from R32 coupe for sale

Rear windscreen with demister, Good condition. $300. Will need to solder on the wires as they had broken off (*i also have the wires and control unit from up inside the pillar on the left hand side i will include with it*)

Left and Right rear 1/4 glass. Glass is in good condition, dress rubbers on right hand side need to be glued back together once installed. $150 each or $250 for the pair

Contact via PM if interested. Pics will be uploaded tomorrow. Cheers

285951_3872838251701_2121686907_o.jpg

329825_3872842051796_1139250395_o.jpg

1999 Nissan Stagea RS4

Front mount intercooler, G-redy turbo timer, recently serviced by Boostworks, excellent condition, surplus to needs, selling with three months SA rego

119,000kms

$9,990 Ph 0404 453 929 or 0405 291 510 or send a text

HKS GT2535 Full Kit for R33 RB25DET. Great condition with minimal shaft play and ready to bolt straight up to your GTS-T.

Includes turbo (duh), elbow and silicone joiner/shield, all lines, basically everything you need to swap out with your standard turbo. I'll include some new turbo to manifold bolts. An easy 250-260rwkw with supporting mods.

$1250. Pickup from 5098.

Price drop - $1150.

3" twin straight pipes - $100

Kicker sub and amp and wiring, everything you need - $250

S3 auto r31 trans, only removed for manual conversion was a good trans when in car, with crossmember, loom etc - need it out the shed $20 and it's all yours

Set of Genuine Volk GT-C's in silver, 17x8 +35 Face 1 and 18x9 +38 Face 2. Fronts clear big brakes, they clear my brembos easily. Fronts in excellent condition, rears have a few small marks on the chrome lip.

Front tyres are stuffed, Rears have 245/40 Potenzas with a couple of mm left. Chasing $1000 for these. Which is well under the price i want for them but i need them gone!

Contact me on here or on 0407 633 573.

for sale, all parts off r32 gtr

r32 gtr front and rear seats + door trims excluding speaker shrouds and electric windown switches $800

carbon vented bonnet $700

kakimoto cat back stainless exhaust used 4 times. $800 i paid $1300

2x r32gtr doors with electric windows, glass and carbon door trims excluding handles with working electric mirrors $1000

wide body front guards $400 the pair

r32 gtr fuel tank with walbro wired in $300

straight pipe to suit gtr with decat built in from reccolection $150

heaps more stuff that ill post up at a later date contact via pm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...