Jump to content
SAU Community

Recommended Posts

Heys guys, i've got these for sale, they suite r33 and there in good condition.

post-55319-0-72155400-1352098999_thumb.jpeg

rear pods that i bought awhile ago and never ended up putting them on the 33. $50

post-55319-0-10998300-1352099046_thumb.jpeg

Bought these afew months ago online and havent gotten a chance to install them so now im selling as i cant be stuff with it. Comes with both Left and Right LED tailights. $100

post-55319-0-78743000-1352099117_thumb.jpeg

Ive got 2 of these greddy turbo timer, used and in good condition, no damage. $20

post-55319-0-32862400-1352099748_thumb.jpg

Defi Boost gauge with Greddy Pillar, Defi Link Control Unit II, used and still in good condition. $200

Pm me if your interested. Thanks

JustJap Karbonetic CF Jun Style front lip for R32 GTR

Cracked clear coat in one corner, scratches on the underside on the other corner. Otherwise in good nick. Will throw in a few small tekscrews that i had used to secure this to my front bar (as i never had a full compliment of standard lip bolts)

$150 negotiable

Pics of the crack / scratches can be supplied

664296_4145627351258_1125808588_o.jpg

BUMP!!!!!!!!!

Heys guys, i've got these for sale, they suite r33 and there in good condition.

post-55319-0-72155400-1352098999_thumb.jpeg

rear pods that i bought awhile ago and never ended up putting them on the 33. $50 ( SOLD ) !!!!

post-55319-0-10998300-1352099046_thumb.jpeg

Bought these afew months ago online and havent gotten a chance to install them so now im selling as i cant be stuff with it. Comes with both Left and Right LED tailights. $100 ( SOLD ) !!!!!

post-55319-0-78743000-1352099117_thumb.jpeg

Ive got 2 of these greddy turbo timer, used and in good condition, no damage. $20

post-55319-0-32862400-1352099748_thumb.jpg

Defi Boost gauge with Greddy Pillar, Defi Link Control Unit II, used and still in good condition. $200

Pm me if your interested. Thanks

^^^ DO NOT bump your posts AT ALL .... and especially after only one day. First and last warning. Imagine if every idiot did this every day - the forum would be full of nothing but bumps.

Items:

RB stainless steel top mount manifold.

50mm wastegate flange, used but good condition

$200

standard RB25DET inlet manifold, with injectors, fuel rail, TB.

$100

drivers side FMIC piping, goes from cooler to bay just above chassis rail $30

brand new walbro 255lph fuel pump

$100

R33 bootlid with lock (no key)

2

wine red (S1) has some rust where a lip was catching water

$50

standard RB25DET exhaust manifold

good condition

$75

stainless steel braided turbo oil feed

suit RB25, has a restrictor to suit highflow.

$80

standard RB25 turbo water lines

lines only

$20

RB25 turbo oil drain

standard connection from turbo

$30

will do standard manifold & turbo lines for $150

set of 16" mitsubishi vrx alloys

buggered tread, 5x114.3

$100

mac master table saw

200mm, 600w, unused

$100

always open to offers, just clearing out the shed and need it all gone!

located Aldinga Beach

PM or text

0425366582

Edited by Crazy Xav

Items:

RB stainless steel top mount manifold.

50mm wastegate flange, used but good condition

$200

standard RB25DET inlet manifold, with injectors, fuel rail, TB.

$100

drivers side FMIC piping, goes from cooler to bay just above chassis rail $30

brand new walbro 255lph fuel pump

$100

R33 bootlid with lock (no key)

2

wine red (S1) has some rust where a lip was catching water

$50

standard RB25DET exhaust manifold

good condition

$75

stainless steel braided turbo oil feed

suit RB25, has a restrictor to suit highflow.

$80

standard RB25 turbo water lines

lines only

$20

RB25 turbo oil drain

standard connection from turbo

$30

will do standard manifold & turbo lines for $150

set of 16" mitsubishi vrx alloys

buggered tread, 5x114.3

$100

mac master table saw

200mm, 600w, unused

$100

always open to offers, just clearing out the shed and need it all gone!

located Aldinga Beach

PM or text

0425366582

Pm sent for photos

you tell em Andrew :P

GT3076 housings front plain housing (i swapped for a polished housing) and a 5 bolt .63 rear housing $150 each $250 pair

stainless top mount mani used heat wrapped $150

tial 38mm external wastegate $250 (i need a 44mm+)

silver s2 wing $30

passenger window reg/rail $30

mint s1 dash $20

hicas ECU $30

parcel shell good condition just has holes in speaker covers for baby seat bkts $10

silver elec mirrors $20 pair

pm me if chasing anything have a few more nik naks laying around

FS R33 series 1 Drivers side Window regulator assembly... No Motor

Just bought it today to only find out that it was the motor gears that had stripped :(

Paid $95 I will take offers a bit lower but not by much...

PM for details

Rb25 gearbox in mint condition, runs a gtr gearset, freshened up and works great. $1450 FIRM

Garret 3076 56t with .63 rear housing ceramic coated. Nearly brand new and in perfect condition $1300 FIRM

Drift works front S14 knuckles in their black edition coating near new $450 FIRM

Bride Brix reclinable + seat rail for S13/180sx (might fit other cars but I'm not sure)

has a few tear's on the right side of the seat

$300

CA18DET AP Engineering Power FC and FC EL Hand Controller (works with any Power FC) for sale

will post at buyers expense

$1100

GTR intercooler plus pipes to suit CA18DET S13

$500

R32 GTST blue rear bar, needs new paint

$100

everything is ono

call or SMS on 0411160974

Edited by driftnick13

Rb25 gearbox in mint condition, runs a gtr gearset, freshened up and works great. SOLD

Garret 3076 56t with .63 rear housing ceramic coated. Nearly brand new and in perfect condition $1300 FIRM

558776_4410047562710_146236422_n.jpg

Drift works front S14 knuckles in their black edition coating near new $450 FIRM

Got a 3 month old apexi data logit kit im looking at selling. Bought bran new and never used due to not having time and possably selling the computer soon.

Never used just taken out the package for inspection.

$350 and i can post if need be.

Pm me for more information

Tein Hr front r32 gtr Coilovers Good condition no leakes unsure spring rate $600 ono

R32 gtr abs unit $300 ono

r32 gtr brake master cyl n booster $200

gtr front hubs and upright $200

Front shafts

ps rack and resivour $150

Bare front cut gd for repairing ure smashed front

32 air vents

Rb25 stall converter &torque plate

Rb25 power steer pump

Rb25 ac compressor

Auto rb starter motor

Rb20det running condition need harmonic balancer and oil pump put on complete minus coils 800

rb20det extreme heavey duty clutch $250

...

Rb25 internal gate

Rb25 neo throtle body

Rb20 throttle body

Rb25 intake manifold

S13/180/32 stock rear camber arms

32/s13 rb front crossmember withvrack

R32 front strut brace

180/13 cusco strut brace front

180sx doors with glass wnd power motors

180 tailiights n garnish

Drift pineaplles

R200 diff housing various gears

32gtr front guards

33 steering colum and lock key

33 hks super draggerr exhaust

Edited by Ke55pig

GENUINE Border R33 FRP Gauge pod, sits on passenger side, excellent condition, exactly the same as this but in Black FRP...

Auto-Parts-Carbon-Fiber-Guage-Pods-for-Nissan-R33-JSK220220-.jpg

3x 60mm HKS Black face memory recall gauges, Oil Pressure/Oil temp/Exhaust Temp, also in excellent condition, Exhaust temp requires a new sender but still has full cable. Oil temp and oil pressure have senders.

hks_01.jpg

bought them but have decided to mount smaller gauges in the DIN Pocket instead.

Price is $300 FIRM. No offers, will not seperate the gauges from the pod at all.

PM Or contact Ben on 0439 888 043

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...