Jump to content
SAU Community

Recommended Posts

Rota D2 EX brand new 18x9.5.+15 and 18x10+15 with brand new Achilles 235 40 and brand new 265 35 fitted and balanced ,

These have only ever been put on the car once and then reversed out the drive way all of 10m :) only selling as going back to my 19" on the stagea as directions have changed. p.m. Me

$1550.post-76904-0-58841400-1389274313_thumb.jpgpost-76904-0-18391700-1389274410_thumb.jpg

No longer for sale ,keeping them:)

Rota D2 EX brand new 18x9.5.+15 and 18x10+15 with brand new Achilles 235 40 and brand new 265 35 fitted and balanced ,

These have only ever been put on the car once and then reversed out the drive way all of 10m :) only selling as going back to my 19" on the stagea as directions have changed. p.m. Me

$1550.attachicon.gifimage.jpgattachicon.gifimage.jpg

Hasa R2 road bike, 60cm - suit tallish rider

700c carbon fork

Marvic wheelset

Shiamano Tiagra gearset

done under 50kms

$400 p/up christie downs

(with extras)

http://www.hasa.com.tw/tw/main_products_detail.php?num=34&class_id=346

Just trying to get rid of some un-used bits and pieces I have sitting around. Not all car related. PM me if you're interested in anything and I'll send some info and pics. Located SE Adelaide Hills (Meadows, 5201).

Car bits and pieces:

3" mild steel catback to 4" SS AM Performance Twin Tips to suit R33 GTST - $450
RB25DET Harmonic Balancer to suit R33 GTST - $220
12" Sub Box/Enclosure - $30
Nissan non-hicas, non-airbag short solid bosskit - $70
Simota Pod Filter (brand new) - $30
BMC Pod Filter (used) - $10
R33/R34 Bonnet Lifters with Fittings - $80
2.5" to 4" Exhaust Silencer - $25
Genuine Nissan Crankshaft Oil Seals x3 to suit R33 GTST RB25DET - $65
R33 GTST Handbrake and Shift Boot - $30 (sold pending payment)
Stock Nissan Silvia S13 Gear Knob - $10
DIY Hard Plastic Garden Edging Front Lip, 10m x 75mm - $20
DIY Rubber Edging Front Lip, 3m x 80mm - $15

A few computer pieces:
Razer Naga Molten Mouse - $90
Logitech G510 Gaming Keyboard - $100
Razer Serious Gaming Mousepad - $15

Edited by brentos_mentos

for sale or swap

R33 GTR rims set of 4

brand new tyres all round 245,

swap for 18x10 or 18x12

all 4 rims as to be the same size all round

asking price $1300

rims are in black plastic dip. can easy take off to make them silver again

Thanks

post-81807-0-67015700-1389768953_thumb.jpg

post-81807-0-50031700-1389768965_thumb.jpg

Just trying to get rid of some un-used bits and pieces I have sitting around. Not all car related. PM me if you're interested in anything and I'll send some info and pics. Located SE Adelaide Hills (Meadows, 5201).

Car bits and pieces:

3" mild steel catback to 4" SS AM Performance Twin Tips to suit R33 GTST - $450

RB25DET Harmonic Balancer to suit R33 GTST - $220

12" Sub Box/Enclosure - $30

Nissan non-hicas, non-airbag short solid bosskit - $70

Simota Pod Filter (brand new) - $30

BMC Pod Filter (used) - $10

R33/R34 Bonnet Lifters with Fittings - $80

2.5" to 4" Exhaust Silencer - $25

Genuine Nissan Crankshaft Oil Seals x3 to suit R33 GTST RB25DET - $65

R33 GTST Handbrake and Shift Boot - $30 - SOLD

Stock Nissan Silvia S13 Gear Knob - $10

DIY Hard Plastic Garden Edging Front Lip, 10m x 75mm - $20

DIY Rubber Edging Front Lip, 3m x 80mm - $15

A few computer pieces:

Razer Naga Molten Mouse - $90

Logitech G510 Gaming Keyboard - $100

Razer Serious Gaming Mousepad - $15

For sale

R33 gtr drivers seat, comes attached to rail to suit R33 gtst so its just a straight swap. Real nice condition $450

3"full turbo back exhaust, came from a R33 4 door has a couple of mufflers so it isnt loud at all, also have a cannon style exhaust that can go with it too. $150

location Port Adelaide area, PM for any info

peace

R33 s1 bonnet mint , green $60

rb25det ecu turbo manual $60

R33 Power steering pump $70

Pair or 5 bolt r33 rear driveshafts $80

The following will be binned if no one wants it within the next few weeks

R33 Tail lights, surrounds, bulbs, wiring etc $30

R33 engine mounts got 3 good ones, $30 for all

R33 suspension arms $20 a pair. rear camber, traction, front castor. Or all of them for 40

R33 Clutch master and pedal $40

stock s13 2.5 inch cat hollowed out $30

For sale or swap

$50 R32 gtst front guards have dents but usable no indicator holes 732 black

$50 r32 gtst type m front bumper,has crack no reo in 732 black

$50 r32 gtst type m spoiler in 732 black clear peeling

$20 r32 gtst rear swaybar no bushes

$250 r33 gtst rims x4 with good 225 tyres has regular gutter rash and paint chips

$100 r32 gtst turbocharger no wastegate actuator or elbow good condition (for age)

$20 r32 gtst side mount intercooler with some stock piping joiners clamps etc

$50 r32 gtst passenger side seat with rails but no belt buckle

$30 sony xplod 6inch speakers

Will swap for r33 25det head, rb30 short motor, r33 turbo, rb aftermarket dump pipe, r33 front brakes with cash either way

Text me on 0423789155 for pics and other info

Item:
R33 GTS-T 4 door auto turb

Item Condition:
Used, average paint for it's age but runs well

Extra Info:

Heyas,

I have for sale my R33 skyline, it is a four door, it is turbo, it is auto and it runs. Is a very cruisy car to drive and stil has a fair amount of poke. The bonus is you can have a rad skyline and still carry more than one passenger that has legs! But seriously I did an oil change on it about 100km ago (probs about 3-4 months ago) and I just don't need it any more as I have another car to for my work.

I bought this car to drive as a daily and had the trans replaced and some of the seals replaced at the same time. Had oil done a not many km's ago but 3-4 months. APPARENTLY had the timing belt done by previous owner but I can't garuntee that.
Has an electric sunroof.
Tinted windows (legal darkness)
Mag wheels
Electric windows
Has awesome skyline floor mats (JDM!) (they are standard and have cool badges n stuff)

All in all a great car to drive


BUT....Bad parts

It has the standard jap headunit in it so no radio but I have been borrowing one of those fm tuner things and it works fine, or you can listen to AM radio! You can have a free headunit that I have sitting here.
The left rear electric window doesn't work.
The right rear handbrake asembly has something wrong with it, makes a clunky noise over bumps but is apparently easy to fix (I have no idea and it didn't bother me)
The paint is a little bit average in some spots.

In summary:

Nice car, it is no show car but if you want a skyline on a budget and you are a fixit type it's a score! Or why not finish it off and make a bit of money?

Fairly firm on the price, but if you sweet talk me I may give in.

Contact Details:
call or sms 0418842599

Price and price conditions:
$4000

http://www.gumtree.com.au/s-ad/keswick/cars-vans-utes/1993-r33-nissan-skyline-gts-t-4-four-door-turbo/1036529695

Edited by 21337

Just trying to get rid of some un-used bits and pieces I have sitting around. Not all car related. PM me if you're interested in anything and I'll send some info and pics. Located SE Adelaide Hills (Meadows, 5201).

Car bits and pieces:

3" mild steel catback to 4" SS AM Performance Twin Tips to suit R33 GTST - $450

RB25DET Harmonic Balancer to suit R33 GTST - $220

12" Sub Box/Enclosure - $30

Nissan non-hicas, non-airbag short solid bosskit - $70

Simota Pod Filter (brand new) - $30

BMC Pod Filter (used) - $10

R33/R34 Bonnet Lifters with Fittings - $80

2.5" to 4" Exhaust Silencer - $25

Genuine Nissan Crankshaft Oil Seals x3 to suit R33 GTST RB25DET - $65

Stock Nissan Silvia S13 Gear Knob - $10

DIY Hard Plastic Garden Edging Front Lip, 10m x 75mm - $20

A few computer pieces:

Razer Naga Molten Mouse - $90

Logitech G510 Gaming Keyboard - $100

Razer Serious Gaming Mousepad - $15

Updated and bump.


BA XR6 Turbo

2 owners (1 Previous)

97,000ks

-Full service history

-Factory Leather

-Factory Premium Sound

-Factory Sat Nav


Driveline:

-External transmission cooler (bypass radiator)

-Transmission service / new fliuid

-Replaced diff oil & brake fluid

-New OEM spark plugs

-Cleaned throttle body / boost control solenoid

-Aftermarket FMIC

-SS Wide Mouth Induction Kit

-Heinrich Tune - ~260rwkw & excellent mid range performance.


Susp/Wheels

-Pedders sports ryder rear springs (to remove factory rake

-Slotted front rotors and Remsa high performance pads

-New whiteline sway bar D bushes

-BBS LM Replica Wheels, (f) 19x8.5 (245/35) & ® 19x9.5 (275/30) ~9,000kms old


Interior/Exterior

-Factory premium sound with colour screen & Sat Nav. Original Remote included

-Ford OEM Amplified MP3 connection

-Upgrade speakers - Excellent SQ now!

(f)Pioneer TS-A1702C components

®JL Audio C2 570X

(sub) Kenwood XW800F

-18% window Tint (Dec 2012)

-OEM XR6 Mats (~1 year old)


-Full Stage 2 detail and Opticoat Paint Protection applied July 2013 By Elite Finish


Just recently had service (95,000ks)

-ULX110 oil & Ryco Platinum filter

- New OEM O2 sensor

- New OEM air filter

- New OEM fuel filter


This car was a credit to the previous owner, and fastidiously maintained by me.


$_20.JPG


$_20.JPG


$_20.JPG


$_20.JPG


$_20.JPG


$_20.JPG

Can't edit, so will have to quote:

$13,500 neg.

This is not the cheapest BA by any stretch, but try find another with Leather, Sat Nav, <100k and the extras for this price ;)

BA XR6 Turbo
2 owners (1 Previous)
97,000ks
-Full service history
-Factory Leather
-Factory Premium Sound
-Factory Sat Nav
Driveline:
-External transmission cooler (bypass radiator)
-Transmission service / new fliuid
-Replaced diff oil & brake fluid
-New OEM spark plugs
-Cleaned throttle body / boost control solenoid
-Aftermarket FMIC
-SS Wide Mouth Induction Kit
-Heinrich Tune - ~260rwkw & excellent mid range performance.
Susp/Wheels
-Pedders sports ryder rear springs (to remove factory rake
-Slotted front rotors and Remsa high performance pads
-New whiteline sway bar D bushes
-BBS LM Replica Wheels, (f) 19x8.5 (245/35) & ® 19x9.5 (275/30) ~9,000kms old
Interior/Exterior
-Factory premium sound with colour screen & Sat Nav. Original Remote included
-Ford OEM Amplified MP3 connection
-Upgrade speakers - Excellent SQ now!
(f)Pioneer TS-A1702C components
®JL Audio C2 570X
(sub) Kenwood XW800F
-18% window Tint (Dec 2012)
-OEM XR6 Mats (~1 year old)
-Full Stage 2 detail and Opticoat Paint Protection applied July 2013 By Elite Finish
Just recently had service (95,000ks)
-ULX110 oil & Ryco Platinum filter
- New OEM O2 sensor
- New OEM air filter
- New OEM fuel filter
This car was a credit to the previous owner, and fastidiously maintained by me.
$_20.JPG
$_20.JPG
$_20.JPG
$_20.JPG
$_20.JPG
$_20.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...