Jump to content
SAU Community

Recommended Posts

after having several cars almost merge into me with my hand on the horn - i've decided that my car horn just doesn't have the impact that it should.

so I was thinking of grabbing one of those "stebel nautilus" ones from ebay. they say the dB is 139dB and up depending on the model you get. i've heard the horn and it sounds like it would get peoples attention

Does anyone know if there is a max dB level that can be used for a horn? or is it a case of, as long as it's not the musical type and constantly on, its all good.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/
Share on other sites

The horn on the GTR is very poor, almost apologetic... I've tossed up the idea of getting one of those aftermarket ones for a while now. The Clio has a great horn, as do a lot of Euro cars, have thought about checking out a wrecker for a second hand one, but those stebel ones seem pretty cheap...

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5693961
Share on other sites

This is what i found for NSW not sure whether it applies to the whole country. EDIT: Maybe you should call the EPA or someone like that and get it from the horses mouth.

Noise from motor vehicle horns

Horns cannot be installed or used if they are louder than the level in clause 21 of the Regulation. This level is 120 decibels for noise made up of a single non-varying loudness and pitch or 85 decibels in any other case.

Police and Emergency Service vehicles are exempt.

Horns should be used as traffic warning devices only and not as a means of relieving driver stress or frustration.

http://www.environme...ehiclenoise.htm

Edited by Shazza24
Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5694021
Share on other sites

Haha yeah... This thread inspired me to research it a bit more.. It came on my car from japan..

I found it on google... It's actually a cool bit of kit..

Has two modes controlled by a switch... The box advertises the as:

"PA!!!!"

And...

"PAAAAaaaaan"

Haha basically u flick switch and it turns it into a tapered sound like a train

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5696743
Share on other sites

You need to get one of these. Maybe get one with a carbon fiber warp and mount it to the pillar? Perhaps put a neon light inside it?

400_F_6948748_RZ2KLvQL0RxbyaItcC83yIsN60LEgZKx.jpg

If I get cut up by some hoon I find it therapeutic to imagine the rubber end is the guys scrotum? I can work out my rage by squeezing and twisting it, whilst simultaneously making an aural expression of my displeasure. :)

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5696812
Share on other sites

Someone cut in front of me this afternoon, and I actually went through the mental process of

*idiot*

*I'll horn him*

*actually, that's right, I'm in the GTR, this horn is p*ss poor so it's going to sound pathetic*

and I let it go.

The R34's contribution to a more utopian society.

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5697910
Share on other sites

Get a Vuvuzela...

I actually used one of these out the back window of the old mans Mitusbishi express. Travelling back from the Bathurst 1000 on the Bells line of road. Nearly got cut off by a silly woman, so blew the f**k out of one of these at her and she broke so hard she locked up the front wheels!! :cheers:

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5698008
Share on other sites

i bought a set of air horns for my silvia because i was sick of getting cut off by tards in traffic.

anyways, at first the two horns weren't that loud but i had the brilliant idea of only using one horn. so double the air into that horn would make it louder and it made a huge difference. It's quite a lot louder then a normal "beep" horn.

I was thinking about buying another air compressor to increase the volume even more.

Edited by Peter89
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5698546
Share on other sites

You need to get one of these. Maybe get one with a carbon fiber warp and mount it to the pillar? Perhaps put a neon light inside it?

400_F_6948748_RZ2KLvQL0RxbyaItcC83yIsN60LEgZKx.jpg

If I get cut up by some hoon I find it therapeutic to imagine the rubber end is the guys scrotum? I can work out my rage by squeezing and twisting it, whilst simultaneously making an aural expression of my displeasure. :)

I'de edit your last sentence, while you still can hahaha.

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5698562
Share on other sites

Was the biggest disappointment after buying my GTR.

First time I hit the horn ( I use it a lot in Japan with the amount of idiots on the road) I wanted to crawl under a rock and hide.

My misso's Jimmny's horn was way,way louder.

Not anymore. Change of horn was my first mod.

I always love winding up the staff in Super Autobacs with their air horn display.

Bunch of horns all wired up with test buttons. Press them all at once and its a hell of noise and staff come running....sumimasen

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5698719
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...