Nm35 Stagea Aero Bar Fast Numbers

[Daleo]

Hi guys, I've just bought a bare Aero front bar for my Stag, and was looking to buy the plastic Spotlight Blanking Plates in the aperture of the bar from Nissan.

The problem is; The version of FAST my local dealer has, doesn't list any part numbers for the aero kit. My Nissan guy suggested it might be bacause it's an acessory option, and these don't appear on their system.

Can anyone find the Aero pieces on a different version of FAST? And if yes, can you tell me what the part numbers for the blanking plates are?

Cheers, Dale.

[Chris Rogers]

is this a nismo option??

I can look up accessories fairly easily at te shop but i need to know what I am looking for. do you have an area/ref figure I can dig into?

[Daleo]

is this a nismo option??

I can look up accessories fairly easily at te shop but i need to know what I am looking for. do you have an area/ref figure I can dig into?

Chris, it's not a Nismo option. There was a Nismo option bar, but this is just the "Aero Selection" part. Basically, the bar came with driving lights or without, there were just simple black blanking plates. I'm assuming the lights will be heartstoppingly expensive, so I'd rather go with the blanking plates.

A couple of the guys have posted up catalogues, and I've just found the relevant catalogue; http://www.skylinesa..._1#entry4911158

Is there enough info in those two pics to get an idea?

Cheers, Dale.

[Chris Rogers]

had a qiuck dig then. I can find the normal front bumper but not that one. I need an axis chassis number and I can get all of it.

[pbk1776]

sorry for hacking your thread

But if I want an Axis front bar + grill for my ARX - Do I need to change my bonnet?

[Daleo]

sorry for hacking your thread

But if I want an Axis front bar + grill for my ARX - Do I need to change my bonnet?

No, but you will need the chrome decoration on the indent in the bonnet, above the grille aperture.

[pbk1776]

No, but you will need the chrome decoration on the indent in the bonnet, above the grille aperture.

My Euro has that chrome thing on the bonnet - and the bonnet have that indent to clip this chrome

so basically I need to look for an AXIS bonnet then? cause how will I clip/install the chrome garnish?

[Daleo]

My Euro has that chrome thing on the bonnet - and the bonnet have that indent to clip this chrome

so basically I need to look for an AXIS bonnet then? cause how will I clip/install the chrome garnish?

Good call, I assumed the bonnet was the same; didn't even know there was a different one for S1 m35s, just with a strip to hide the indent.

Looks like we need an AXIS owner to weigh in...

Edited March 14, 2011 by Daleo

[bigkevracer]

Since I now have an M35 with an aero bar, I don't suppose the numbers are printed on it?

I don't have blanking plates though but the foggies are just Cibie, I would think they're a standard size?

[Daleo]

Since I now have an M35 with an aero bar, I don't suppose the numbers are printed on it?

I don't have blanking plates though but the foggies are just Cibie, I would think they're a standard size?

If you feel like having a look that'd be great! What's the bet any part number is blocked by the Reo...

Perhaps running the VIN from a car with the Aero Selection Bar/Kit through FAST will reveal the part number? I don't really know if FAST works that way.

I may end up having to make something, I guess time will tell.

Edited March 15, 2011 by Daleo

[prince_skyline]

I have the original m35 parts book at home and know it includes part numbers for options as well. Will check it out for you but won't be able to until tomorrow. I posted the scans of the brochures as you showed above and also have some other paperwork m35 option related, so I'll see what I can find for you

I have also heard the foglights are identical to Nissan cube however have not confirmed. May be worth a yahoo jp search to see if this is correct or if I had the part number for the cube foggies could cross reference it to the M35 aero ones.

Will see what I can find.

[bigkevracer]

If you feel like having a look that'd be great! What's the bet any part number is blocked by the Reo...

Perhaps running the VIN from a car with the Aero Selection Bar/Kit through FAST will reveal the part number? I don't really know if FAST works that way.

Well I can help with that too, if you want I can give you my VIN to put through FAST?

Rear Aero bar is a bitch to clean though, the little 'shelf' on the back bumper is annoying!

[scotty nm35]

I agree, but it looks heaps better than the stock one...

[Daleo]

I have the original m35 parts book at home and know it includes part numbers for options as well. Will check it out for you but won't be able to until tomorrow. I posted the scans of the brochures as you showed above and also have some other paperwork m35 option related, so I'll see what I can find for you

I have also heard the foglights are identical to Nissan cube however have not confirmed. May be worth a yahoo jp search to see if this is correct or if I had the part number for the cube foggies could cross reference it to the M35 aero ones.

Will see what I can find.

Very interesting points you make.

Well I can help with that too, if you want I can give you my VIN to put through FAST?

Rear Aero bar is a bitch to clean though, the little 'shelf' on the back bumper is annoying!

Thanks to both of you fella's, really appreciate the help!

[iamhe77]

K6020-AQ003 is the number for the front bar, but it looks like the plates etc are "all in one" with the front bar and ducts (section F20-001 if your Nissan guy needs to know)

Edited March 15, 2011 by iamhe77

[pbk1776]

Sorry for hacking again

real quick question

so If I want to change my front bar ARX to an AXIS - can I just leave the grill stock? or Do I need to change grill to fit it in?

Is this straight bolt on?

[Daleo]

K6020-AQ003 is the number for the front bar, but it looks like the plates etc are "all in one" with the front bar and ducts (section F20-001 if your Nissan guy needs to know)

Thanks Cam, that should help out .

[Daleo]

Sorry for hacking again

real quick question

so If I want to change my front bar ARX to an AXIS - can I just leave the grill stock? or Do I need to change grill to fit it in?

Is this straight bolt on?

Different Grille, different aperture shape in AXIS bar.

[Daleo]

Looks like I've hit a wall.

I used all the numbers that everyone has kindly given, and my parts guy Chris, at Nepean Motor Group, has turned out to be quite the FAST guru! The system seems to be just menus, hidden inside menus, hidden inside menus...

The numbers did eventually lead us somewhere.

We were able to track the Aero Bar to the point where a complete bar could be ordered ($2500!) but we weren't able to find a breakdown of the individual parts that make up the bar. It also din't show the optional driving lights in the front bar. It also appear that when you order the bar it comes colour matched.

The biggest issue that stopped us in the end, was the language barrier. There's a lot of japanese text that could possibly provide more info, but we simply didn't know.

So unless I can find the bits somehow on Yahoo auctions or IM, I think this ride is over.

And if you have one; TAKE CARE OF IT!

Thanks again to everyone for you assistance .

Cheers, Dale.

Edited March 17, 2011 by Daleo

[scotty nm35]

I do, although it hits nearly every gutter if I park front in.

I would just keep an eye out on IM. The foggies look good but I would prefer if they were brake ducts or CAI.