Jump to content
SAU Community

Recommended Posts

I hate you so much at the moment Craig. At least I know mine are on the way!

Gold......my wife run's the club if you want membership!

Got the road free to myself this morning after getting past an AU XR8.....pfffft!

A little bit of a play through the last couple of corners......front end react's perfectly....Nankang's react baddomokun.gif..........lol......XR8 must have been on retread cross-ply's......

Haha maybe I should get her to pull your sway bars off for me :P

Get some new tyres! Nankang's are RUBBISH! And in the wet it's like skating on steel wheels. Worst tyres this side of retreads.

Haha maybe I should get her to pull your sway bars off for me :P

Get some new tyres! Nankang's are RUBBISH! And in the wet it's like skating on steel wheels. Worst tyres this side of retreads.

totally agree...Nankang's are SHIT!!!!!.....first set of crap tyres ever!!!.....but they are also the first set of tyres that I have had on the car for more than a year....and they have coped a hiding!

Might be back to the trusty old Falken's in a month.

I'll admit, I had some "help" from my 3 yr old son today; you guys like sticky tape, right?:whistling:

Mine arrived yesterday. Two days to arrive :thumbsup: and now it looks like it will take three days to unwrap! Your 3yo son did a very good job with the tape.

Thanks again for all your effort Dale :worship: - can't wait to put them on, although that could be a week away!

Mine arrived today also. My son unwrapped them & he was like a kid in an erm auto parts store lol.

There was only one minor issue. A bag of the grease busted open & the bag that was around that was also split so I've got black stuff all over the place :yucky:.

I don't suppose there's anything too special about that grease? I've got a few different types of 'standard' grease around if I can't squeeze enough out of the 2 packets supplied.

Mate, they really look great. All those gold anodised fittings make it look very pro, and even match my TV tuner lol. Thanks again Dale.

I fitted the front bar last night, I had some issues with the gold clamp rings, they seem to hit the chassis when clamped to the bar and only allow a small amount of bar travel. Has anyone else hit this problem? I was worried it would cause load on the links.

I only had to file a bit off the lower part of the clamp to make it work though...

Jules did tell me he'd had a similar issue with his, which manifested in a light knocking noise; but that Whiteline had sorted the issue. I believe due to the large diameter of the bar, the orientation of the collar will be fairly critical.

If you are installing these with the car on ramps this should be fairly straight forward, if on stands, it's a little more complicated. Scottys solution is a fairly simple one; grind or file the area to gain some clearance.

If anyone has a problem; please let me know.

Cheers, Dale.

I just fitted Ironpaw's bars today, same issue with the front locating clamps. I just filed a few mm off the upper half of the clamp and it gave me back all the travel the bar would need. They have to be clamped hard one side so when you lower the car they sit central giving the bar plenty of clearance. Other than that they are great.

We set the rear bar at maximum, (closest hole to the mounts) and the heavy front bar on the softer outside holes. How do they feel mate?

Jules did tell me he'd had a similar issue with his, which manifested in a light knocking noise; but that Whiteline had sorted the issue. I believe due to the large diameter of the bar, the orientation of the collar will be fairly critical.

If you are installing these with the car on ramps this should be fairly straight forward, if on stands, it's a little more complicated. Scottys solution is a fairly simple one; grind or file the area to gain some clearance.

If anyone has a problem; please let me know.

Cheers, Dale.

My clamps were sweet. . but I know they did shave a bit off them at time of fitting. . the knocking noise was an issue with the powder coating and bolt diameter which created the knocking but was all sorted. But mine was the R & D car so it was expected, the things I force my stag to do for others. . whistling.gif

I guess variations in cars would account for mm differences. .

Mine rock and I love them. . my settings are hard front & medium rear. . . . which Whiteline found offered the best results for street conditions.

I just fitted Ironpaw's bars today, same issue with the front locating clamps. I just filed a few mm off the upper half of the clamp and it gave me back all the travel the bar would need. They have to be clamped hard one side so when you lower the car they sit central giving the bar plenty of clearance. Other than that they are great.

We set the rear bar at maximum, (closest hole to the mounts) and the heavy front bar on the softer outside holes. How do they feel mate?

It's f**king sweet as! Now I understand the "corner devouring" thing. Most of the body roll is gone. Cornering and the turning seems much sharper and precise.

Almost got self killed trying to take a hairpin too fast...I miraculously slid out the rear and slid over a traffic island while missing a sign post on the island and a parked ve ss sportswagon by inches...

Took the car to mt dandenong this Arvo...great place to put the car thru its paces!

Havent really felt any different comfort wise...I want to try the max setting on the front bars!!

Edited by ironpaw

Told ya :thumbsup:

BTW, all that "Corner Devouring" was obviously done on your private road; don't want people getting silly ideas now...:ph34r:

Glad you're enjoying them. :cheers:

Of course...I was strictly following the speed limit...just didn't brake enough :whistling:

Australia Post has let me down, and they STILL haven't arrived! :rant:

Hopefully they'll be waiting for me when I get back from Melbourne Thursday night. Serves me right for being optimistic with Australia Post...

Fitting them Saturday hopefully, going to follow Jules' suggestion of hard front and medium rear if I can work them out.

Couple of questions...

  1. Do they come with instructions on fitting/setup?
  2. Is the filing issue Scotty found only applicable if you fit them on a hoist/with the wheels suspended in the air?

Australia Post has let me down, and they STILL haven't arrived! :rant:

Hopefully they'll be waiting for me when I get back from Melbourne Thursday night. Serves me right for being optimistic with Australia Post...

Fitting them Saturday hopefully, going to follow Jules' suggestion of hard front and medium rear if I can work them out.

Couple of questions...

  1. Do they come with instructions on fitting/setup?
  2. Is the filing issue Scotty found only applicable if you fit them on a hoist/with the wheels suspended in the air?

No good mate, hopefully very soon!

I didn't open them up to check, but I believe they do come with fitting instructions.

I think it might be a good idea to slip the collar into position and check for clearance either way; saves removing them later if there's an issue.

If Scotty reads this; did you take a pic of where you were getting contact, or where you filed the collars for clearance?

I understand where you're talking about; but it might be good to illustrate for the others as my bars being a different diameter, don't have this issue.

If so could you please post them up?

Cheers, Dale.

Edited by Daleo

Yeah I no Dale, all good! Australia Post can just be slack sometimes, esp in my area!

I got the impression reading other people's posts that if you put the car up in the air with the wheels suspended, you'd get the clearance issue. If you put the car up with the wheels supported you'd be all good. Just wanted to check this before I gave it a bash.

It will hit either way, and im not removing all those tray screws and the bar again. lol.

Before you put the links on, just test the travel of the bar and you will see what I mean. File the upper clamp a little, both sides of the flat section and it will allow more travel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...