Jump to content
SAU Community

Recommended Posts

Got the brakes machined today.......... feels so much better!!!

also its first oil and filter change and done the sparkies just for good measure.

only thing im waiting for now is my new rocker cover gasket cos its leaking like a sieve,

otherwise its all good :D

came across this and was wondering if anyone knew any more info on finding a guage holder that mounts in that exact possition where the TV unit goes...........

was hoping to hold 3X 2" 1/16 guages............

cheers :)

post-83704-0-17997800-1311679880_thumb.jpg

came across this and was wondering if anyone knew any more info on finding a guage holder that mounts in that exact possition where the TV unit goes...........

was hoping to hold 3X 2" 1/16 guages............

cheers :)

That's got to be custom.

I reckon you could roll a piece of sheet metal to fit there and mould some gauge cups in fairly easily.

came across this and was wondering if anyone knew any more info on finding a guage holder that mounts in that exact possition where the TV unit goes...........

was hoping to hold 3X 2" 1/16 guages............

cheers :)

start searching around the G35 forums.......are the defi gauges? If so there website my have that mount to suit.

some good ideas there but still no closer unless i make my own i guess.................

http://g35driver.com/forums/forced-induction/167796-best-spot-hide-your-gauges-g35.html

ok im going to build myself a custom guage holder to fit 3 guages, ive already got boost and am wondering what the other 2 should be......

im thinking oil pressure and .................???..................... (water temp is already on the standard cluster so not sure if i really need that one)

other choices are oil temp, trans temp and air/fuel ratio..................... (have i missed any?)

or if the others arent to important i'll just make a 2 guage holder instead!!!

ok im going to build myself a custom guage holder to fit 3 guages, ive already got boost and am wondering what the other 2 should be......

im thinking oil pressure and .................???..................... (water temp is already on the standard cluster so not sure if i really need that one)

other choices are oil temp, trans temp and air/fuel ratio..................... (have i missed any?)

or if the others arent to important i'll just make a 2 guage holder instead!!!

EGT and Trans temp would be my choices along with Boost.

ok im going to build myself a custom guage holder to fit 3 guages, ive already got boost and am wondering what the other 2 should be......

im thinking oil pressure and .................???..................... (water temp is already on the standard cluster so not sure if i really need that one)

other choices are oil temp, trans temp and air/fuel ratio..................... (have i missed any?)

or if the others arent to important i'll just make a 2 guage holder instead!!!

where are you gonna put it. i might be interested in a 2 gauge holder with some$$ wanna make mine abit neater

EGT and Trans temp would be my choices along with Boost.

yeah oil temp and trans would be alright.

Exhaust Gas Temp................. why do u say that ?

where are you gonna put it. i might be interested in a 2 gauge holder with some$$ wanna make mine abit neater

i've pulled out the box where the tv goes seeing as i dont have one.

will be sorta like this..........

post-83704-0-36807200-1312194280_thumb.jpg

yeah oil temp and trans would be alright.

Exhaust Gas Temp................. why do u say that ?

EGT is very useful for a number of reasons.

1) In general driving you start to see how the ECU manages fuel and helps understand the whole car. ie, on the open road car leans right out and EGT is up around 600-700 degrees.

2) If you start (I think you already have) moding the car and the various components you can see the direct change you have made and in particular the change it makes to fueling which is very important to avoid leaning the motor.

I am sure there is more than this ... :)

EGT is very useful for a number of reasons.

1) In general driving you start to see how the ECU manages fuel and helps understand the whole car. ie, on the open road car leans right out and EGT is up around 600-700 degrees.

2) If you start (I think you already have) moding the car and the various components you can see the direct change you have made and in particular the change it makes to fueling which is very important to avoid leaning the motor.

I am sure there is more than this ... :)

How does EGT compare to AFR? reading wise...is one more accurate than the other?

How does EGT compare to AFR? reading wise...is one more accurate than the other?

I would think the AFR is a lot more accurate and if the device measuring is accurate enough will give you a much better result but I would imagine a very different cost.

Probably better than the EGT is the Wide band O2 sensor. Fester and more accurate and able to use for on road tuning.

yep make me one.

my TV is out of order as my emanage took over the dvd players spot.

pending price obviously

Myself and a panel beater mate are gonna try and put these into production, i'll make both dual and tripple guage holders............. fingers crossed!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...