Jump to content
SAU Community

Recommended Posts

I've got the same one theo but my boost gauge doesnt go up high enough to measure properly.

Def didn't get any big increase in power when I fitted it, which I'd probably expect from an extra 4 psi.

What are you using to measure the boost increase? The BOV should make no difference to the boost, thats the wastegate's job. List your mods again?

i have an Auto meter Sport compact II boost gauge. i was sitting on 16PSI last time i checked now im at 19PSI (its still not mounted on the dash so its hidden under the seat atm LOL)

Power duct with BNC filter.

Scotty's Dump pipe, Full 3" exhaust.

Intake spacer and HDi FMIC.

yeah found the broken vacuum hose to the wastegate!!!!!

at WSID tonight

first run was a 14.469 @ 161.74.............. (19PSI)

second run i farked up 14.995 @ 153.82/......... (19PSI)

3rd: 14.325 @ 159.34 .................. (16PSI)

4th: 14.373 @ 156.08 ..............(16PSI and quite windy)

and last run was the best with a 14.149 @ 157.89 .............(16PSI and quite windy)

so im happy with that, was guessing between a 14.0 and 14.6 :D

I'll know as soon as I get my Fcon V Pro tuned. But with everything sitting in front of me I have no reason to doubt it wouldn't be the best solution. It is more expensive than the Emanage though.

iamhe77 is currently selling an Fcon V Pro with software and accessories (which you need) and Jetwreck is currently selling the plug and play NM35 harness (which is discontinued). The plug and play harness is great. Emanage requires you to spider the harness to all the necessary inputs.

Only optional items are additional sensors, which I've picked up. I'm just waiting to install everything I've got sitting here, then buy some injectors, then go and get a tune.

yeah i need an piggyback ECU ............. which one is the go ???

The Fcon V-Pro is the one you want... the only reason I am selling mine is because of a lack of harness for the PNM35 (HKS tell me that the Z33 harness will not be suitable :().

It is a standalone ECU, but in the VQ25det it is in piggyback "format". Basically instead of adding/subtracting x values on top of what the OEM ECU does, it sends it's own values based on your tune... totally ignoring the variations that the OEM ECU sends to the engine.

It, unlike the eManage, removed the speed limiter and can (as I have stated before) change how the throttle reacts.

Only thing it can't do is manipulate the cams, but as Scotty may attest, neither can the eManage/Vmanage combo unfortunately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...