Jump to content
SAU Community

Recommended Posts

  • Replies 155
  • Created
  • Last Reply

Top Posters In This Topic

J31 maxima rear drums are a slight upgrade if you wanna clear 15's, thats if the j31 calipers bolt on( haven't got round to confirming /sourcing the brakes) and will need to redrill to 4 stud as they are 5

  • 2 weeks later...
  • 2 months later...

The buckles should be sweet.

R32/R33 front seats can be swapped in and their original buckles used, so I can't imagine the rears are different.

The actual assembly/box thing that retracts the belts might be a different shape/fit though.

so i know its in the parts thread. but not exactly what im after.

my rack is leakin in the laurel..

it was originally hicas. ive since put in a non hicas cradle and removed the lines yadda yadda.

i plan to replace the rack when i remove the engine and would like to put a non hicas rack in if possible.

can i use a non hicas s13 rack or will the lines not fit up??

I've grabbed pics of the non hicas A31 and S13 ps racks iff you guys wanted to give them a look. There's 2 of each, Ceffy are the top ones.

11gtvl5.png

357q7v4.png

S13

2edp15i.png

ekg47t.png

Looks like if you have the top Cef rack either S13 rack should line up pretty easily, the other ceff rack(duet-ss?) is completely different.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...