Jump to content
SAU Community

Recommended Posts

This engine is 105kgs lighter than the VG30DETT, much lighter rotating mass too. For example the cams are about .5kg lighter each.

Valves are around 2mm bigger reach and has four bolt mains. 93mm bore instead of 86mm

We decided to do this conversion as the VQ is a much more advanced and lighter motor

DSCF8336.jpg

VQ30 Motor

DSCF8371.jpg

Fitting motor and checking angles and measurements.

dscf9524.jpg

GT28RS turbos with Tial stainless turbine housing mounted east-west rear in engine bay.

Jigging turbos for 6Boost to make custom manifolds.

dscf9647_000.jpg

Custom Manifolds from 6Boost

dscf9656_000.jpg

GTRS Turbo set up with custom manifolds made by 6 BOOST,custom top feed fuel rail, stainless Tial V Band turbine housing.

DSCF9887_000.JPG

Dry sump pulley and belt with light weight Kevlar -12 fittings and hoses. 1000psi rated.

enginebay_000.jpg

Totally striped engine bay, linnished excess welds, panel glue and brackets, then we painted it satin gloss.

DSCF0039.jpg

New Alternator Bracket

198327_10150205323519018_366534644017_8823782_8116125_n.jpg

There are more photos on our Motorsports page, Just click on the Project 300zx links.

Also visit us on Facebook

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

TOPIC APPROVED. can't wait to see more johnny. post up all your crazy idea and plans please!! this car is going to be great. the real question is WHEN DO I GET TO DRIVE IT??? don't be tight john. you know the beer baron can handle the zed. i've been a boat captain for years, started in juniors, lazers, tasers, flying ants and moved up to offshore yacht racing. so I think i'm ready for a bit boat like this one.

Yes I have done a lot of sailing to, doesn't qualify you though Rich. She will be a fast boat now. You will have to get in line, after me is John Boston then John Webb and John Bowe, who was here today for a good hour checking the car out. He was very impressed and wants a drive. THe John driven car!!!!!!!!!!Then there is Dave, a mechanic here who has done most of the work, although I think he drives about as good as you, Beer Bitch. Hopefully you won't fit in it either, which is my excuse for fats not to drive it, he he.

Nice work John!!! The slot car has come a long way since I last spoke to you.

Getting very serious now and love the front guards!!! Going to look like a JGTC car....

Keep the updates coming...

Jack

LATEST IMAGES

The Plug is finally finished for the front bar, Painted in 2pack Black. Ready to make the mould, then it will be made in Carbon fibre

DSCF0043.JPG

This is where we got our design from.

nismo_gt500.jpg

Just installed the motor and Dave is wiring up the Haltech with military spec wires.

DSCF0045.JPG

There are more photos on our Motorsports page, Just click on the Project 300zx links.

Also visit us on Facebook

I Still dont see any teeth

Looking good John

A bit of bling for you, gold heat shield by DEI, it is supposed to reflect 90% of heat. With the turbo's right back and close to the firewall this should help a lot.

Motor going back in today, ye ha.

Like a rat with a gold tooth. Beat you to it Beer Baron.

http://www.nismo.com.au/images/DSCF0071_000.JPG

http://www.nismo.com.au/images/DSCF0070_000.JPG

so john, tell us more about the engine.

How much have you needed to do to turn it into a viable track engine, just forged internals and a few odds and ends or does the factory vq30 scrub up ok block wise and just needs much the same love as say an rb26 or similiar.

To put it shortly, do you have to spend a mint to make this engine really go?

i already gather that ini your instance your going whole hog.

Hey Mr UAS,,,more power isn't going to fix your problems,,,that "Slot Car" as you call it,,,is what I would call in Slot Car terms a flexicar.

This is your car:-

This is a real Slotcar:-

Cheers cardigan wearer

Neil.

Yes Neil it should give you a run next time we meet. No more power, about the same we suspect, just much lighter, by 105kg. Not big money at all using a stock VQ30DET $1500, then added strong valve springs, dry sump, custom plenum, top feed fuel rail and exhaust manifolds, so it should be efficient. Motor only cost $2000 and has four bolt main, hard annodised pistons, Molly coated skirts, 93mm bore compared to VG30DETT so shorter rods and 9 to 1 comp so should rev. On E85 and 20psi it should easily make an easy 400rwkw with the boost button on the straights. Compared to the VG the VQ has a much lighter rotating mass, the cams are all hollow with narrower lobes and wasted down and all four are about 2kg lighter, a fair bit, alloy buckets with metal shim 39 grams each compared to VG hydraulic 63 grams each, multiplied by 24 adds up to, the cam gears are about half the weight, crank pulley is much lighter although now has a Ross Racing custom balancer. Even the ignition coils are by about 35%. The block being alloy is the biggest weight saving.

The VQ has better port design and stock valves are around 2mm larger.

We do have a spare block with Darton Sleeve kit so can go up to 100mm bore and with VQ35DE crank we have can go 3.8 litre and will use forgies then and bigger turbo;s and make easy 500rwkw.

In addition the VQ30 has another improvement being crank and cam trigger rather than crank angle sensor. More pictures to come, engine and gearbox have just been put in

New dry carbon targa roofs ( no gelcoat, all carbon fibre, Kevlar, Polly core and epoxy resign), now 980 grams each compared to wet carbon 1.55kg previously, so over 1 kg saving off the roof.

DSCF0108.JPG

Custom alternator bracket to support the rear of alternator, wasted down to save wieght.

DSCF0096.JPG

Engine now installed into car with Turbos

DSCF0104.JPG

DSCF0105.JPG

DSCF0106.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...