Jump to content
SAU Community

Recommended Posts

Sorry guys, I know I said I will send you the lenses and surrounds a couple of weeks ago but I still haven't been able to pick up my front bar as yet.

I still intend on donating a set but if somebody can supply psi before I can then go for it.

My apologies psi

i can send you mine but i've totalled the lenses...?

i thought 75coupe/dave074 had sent them so i broke out the hammer!

if they are useful let me know and i will send em tomorrow.

75Coupe has sent us one lens, but we need both sides. Can you email me some pictures of what they look like now? As long as the assembly is in tact, they will be useful for testing.

We would also like to see a list of members who are willing to pre-purchase these, as we would need a few people (exact numbers will be confirmed later) to commit in order for this to go ahead.

I have the lense from the other side as well as both housings, I only got them for the glass lenses to cut to make them fit my car, so the other parts are leftovers...

I'll see what I can do about getting them to you so we can continue with this...

I guess if I get my glass lenses to fit I wont be in for the purchase of what you produce, but if I fail Im keen...

page 4 of this post shows my workmanship.

i have the complete assembly minus the lenses.

Do you also have the plastic cover that mounts to the front bar? Our R33 demo car doesnt have a standard front bar so I am unsure how this pieces together.

I have the lense from the other side as well as both housings, I only got them for the glass lenses to cut to make them fit my car, so the other parts are leftovers...

I would prefer that I get the whole lot from one person, but if you just want to supply the other lens I'll get the rest from StuntCock? PM me for how you want to handle this.

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...