Jump to content
SAU Community

Recommended Posts

I'm in the process of buying a car from Edward Lees Japenese Auto Centre/Fat Frog Imports, at 71 Parramatta Rd, Concord .

I'm buying from Qld , I've put down a deposit and fly down on Sat the 30th yo pick up and drive back so a bit of a good faith purchase.

I've been warned to be beyond carefull when dealing with this yard , does annyone know anything about them good , bad , otherwise.

Any imput will be gratefully received.

:cheers: All.

Link to comment
https://www.sau.com.au/forums/topic/361756-anyone-know-this-car-yard/
Share on other sites

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

I'm in the process of buying a car from Edward Lees Japenese Auto Centre/Fat Frog Imports, at 71 Parramatta Rd, Concord .

http://www.japanesea...entre.com.au/el ... hp?id=1672

I'm buying from Qld , I've put down a deposit and fly down on Sat the 30th pay for the car, pick up and drive back to Surfers so a bit of a good faith purchase.(or stupid)

I've been warned to be beyond carefull when dealing with this yard.

I know its not a Skyline so no trees through my head please.

It is an import so some of you guys will likely know.

Does annyone know anything about them good , bad , otherwise ?

Any imput will be gratefully received.

:cheers: All.

Edited by BASHO

my friend bought a skyline from there, his contact on here is d3ltr33 pm him and he will give you his verdict, i am sorry to say it won't be what you want to hear. be careful

what car are you buying off them?

maybe someone a little more local can give u a hand inspecting it prior to your commitment to come down

Edited by Yts

Do a REVS check make sure you do all the usual checks you would do when buying a second hand car.

+1. Has a mechanic looked it over? Compression, oil leaks, rust, suspension condition, you'll want to know all this and more.

Definitely do a revs check.

I'm in the process of buying a car from Edward Lees Japenese Auto Centre/Fat Frog Imports, at 71 Parramatta Rd, Concord .

This one.

http://www.japanesea...entre.com.au/el ... hp?id=1672

I'm buying from Qld , I've put down a deposit and fly down on Sat the 30th pay for the car, pick up and drive back to Surfers so a bit of a good faith purchase.(or stupid)

I've been warned to be beyond carefull when dealing with this yard.

I know its not a Skyline so no trees through my head please.

It is an import so somebody here will likely know.

Does anyone know anything about them good , bad , otherwise.

Any imput will be gratefully received.

:cheers: All.

Edited by BASHO

I'm in the process of buying a car from Edward Lees Japenese Auto Centre/Fat Frog Imports, at 71 Parramatta Rd, Concord .

http://www.japanesea...entre.com.au/el ... hp?id=1672

I'm buying from Qld , I've put down a deposit and fly down on Sat the 30th pay for the car, pick up and drive back to Surfers so a bit of a good faith purchase.(or stupid)

I've been warned to be beyond carefull when dealing with this yard.

I know its not a Skyline so no trees through my head please.

It is an import so some of you guys will likely know.

Does annyone know anything about them good , bad , otherwise ?

Any imput will be gratefully received.

:cheers: All.

link isn't working

No man, I dont like that place, their cars and salesmen are dodgy as, when I was out lookin for cars, one of their salesmen tried so hard to sell me a dodgy R32GTR that I test drove, I could see his desparation and try-hard ways, and I'm like, 'Hello, no means no and thats it'.

Wouldn't you find this out before you put down a deposit and made plans to fly down to look at the car?

Only if you have 50% of a brain, or more.

Like the old adage goes, "a fool and their money are soon parted."

Whats the arrangement with your deposit if you dont proceed with purchase?

Do you have an agreement in writing?If not I would be sweating bricks.

Only heard good things about Prstige Motors for a Nissan .What are you buying?

Edited by samuri

^ ^ ^ so glad you said "almost"

The ones around Sydney that have had good feedback are

* Top Secret Imports

* JapLink

* Nagoya

* Powerplay Imports

* Northshore Prestige

...but even then, the odd one slips through.

I've been warned that for the next two months, there may be a few "hot" cars coming over from Sendai area.

And I haven't a clue as to how to geiger-count micro- or millisieverts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...