Jump to content
SAU Community

I Made My Own Cooling Plate

sinistaGTR

By sinistaGTR,
in Fabrication

 Share

Recommended Posts

sinistaGTR Grand Master

sinistaGTR

Posted
  • Author
Posted

look great, but..

not trying to be a naysayer but isnt this what the rubber seal under the bonnet is for?

Im not sure mate...but as you said looks about a million times better and all the big name companies make them so im sure there must be something there lol

sinistaGTR Grand Master

sinistaGTR

Posted
  • Author
Posted

wow, you own a 34 GTR and you cheaped out on a relatively low cost item. oh well, at least ur DIY looks good!

As i first stated I hate spending money on rice and $150 for a 1.5mm piece of alloy is absolute bullshit. I prefer to save my money for things like the jun forged flywheel and clutch I just had installed...or some turbos and cams etc.

I dont mind spending money where it counts, and thanks for stating it looks good.

The Bogan Grand Master

The Bogan

Posted
Posted

I wouldnt say fabricating a bit of kit for your car is cheaping out, more like common sense, most stuff you build is better than some overpriced brand named POS.

Nice work mate, keep it up.

People who can do, people who cannot talk alot.

thrtytwo Veteran

thrtytwo

Posted
Posted

Haha, wasnt trying to bag him out. As I said, he did a great job.

I'm a fabricator by trade so could certainly make anything I needed if I felt so Inclined.

Obviously we just have different points of view on car modifying. I like having brand name aftermarket parts on my cars, and I respect that you might not.

And while I don't agree that "most" peoples DIY is better than brand name gear(in this case it is certainly as good as anything he could of bought), I do agree that a lot of brand stuff is overpriced :S

Personally I would of got a garage defend CF cooling panel :D

SNOQPY Collaborator

SNOQPY

Posted
Posted

i made this for my 31, although i dont run the standard latch i have bonnet pins its made out of 3mm stainless but if anyone wants one i cant have one lazer cut and folder for $50 and hole for the latch cut out aswell, pm me if needed.

DSC01339.jpg

bubba Grand Master

bubba

Posted
Posted

I hate "brand name" stuff and will only buy it if I absolutely have to. I get more gratification out of working on my cars myself so I will make whatever I can. The only things I don't do are tuning and suspension setups.

Any of you fabricator type people got any tips/hints/suggestions for painting the ally? I could buff it up but not really a fan of the "bling", would prefer to paint it matt black!

Craved Grand Master

Craved

Posted
Posted

Any of you fabricator type people got any tips/hints/suggestions for painting the ally? I could buff it up but not really a fan of the "bling", would prefer to paint it matt black!

Scotch brite for mechanical etch and removal of the oxidisation, and a spray can primer that states its suitable for aluminium.

typevu Grand Master

typevu

Posted
Posted

you could have bolted the cardboard in for lolz

For a second there I thought he was serious about the cardboard one... then I scrolled down further. :laugh:

and I'm one of them that purchased the cheap crappy Hi Octane one which ended up cracking....

zebra Grand Master

zebra

Posted
Posted

For a second there I thought he was serious about the cardboard one... then I scrolled down further. :laugh:

and I'm one of them that purchased the cheap crappy Hi Octane one which ended up cracking....

Mine was f**ked before I even fitted it to my 33 :(

Raysboostin Mentor

Raysboostin

Posted
Posted

i would be interested in seeing the inlet temps at the filter with and without the cooling plate. ive seen these plates for sale alot and often wondered if they would block the flow of cool air to the cool air intake fitted to the airbox and make it suck in hot air from the engine bay. i might have to make one up and see if theres a difference.

but on a different thought, would you really need one?? i guess youd need it if your having overheating problems.

beemae30 Proficient

beemae30

Posted
Posted

You can fell the difference. Grab your filter with your hand before and after. And just like everything that you do to your car, you don't need it. But it does increase power ;). Colder air/ more dense= more oxygen/more bang for buck

MBS206 Grand Master

MBS206

Posted
Posted

There are two functions for these covers...

1) To force the incoming air through the radiator to aid in cooling instead of going around and over it (It will go over once the bonnet rubber loses its "springyness" and doesn't seal properly.

2) For looks. They're designed to hide the "uglyness" of seeing the back of a FMIC and AC condenser/radiator...

beemae30 Proficient

beemae30

Posted
Posted

Ahhhh bugger. LOL i had this one and the Heat Shield one open and i replied to the wrong one hahaha. Yes Believe Matt. Im also looking at making some panelling for the side and bottom of the main feed from the front bar to try and help a bit more.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...