Jump to content
SAU Community

Recommended Posts

I have just bought a 2nd hand ARC SMIC of off ebay for my R34 GTT. Before installing it I have have my mate who works at an intercooler manufacturer to check it out for me. He has set it up for a pressure test and it is leaking out all the bolt holes. I have tlked to the guy who sold it to me and he keeps trying to convince me that this is how it was produced. I find it extremenly hard to believe that a reputable company like arc would manufacture an intercooler which has bolt holes going into the tank and requires you to seal up bolts when you install.

IIf anyone has had any experience with these coolers or ARC and can shed some light on this for me it would be much appreciated.

post-69558-0-67795300-1304559517_thumb.jpg

post-69558-0-25845300-1304559532_thumb.jpg

on my phone so hard to see pics... but looks like its not bolt holes, and leaking from the core/end tank area?

If so... its probably been dropped or something.

It's possible it came like that and owner never knew as its not leaking heaps by the look of it.

on my phone so hard to see pics... but looks like its not bolt holes, and leaking from the core/end tank area?

If so... its probably been dropped or something.

It's possible it came like that and owner never knew as its not leaking heaps by the look of it.

It is definitely the bolt holes you can see they have been drilled through or retapped through into the tank when you look in the inlet and outlet.

The guy who sold it to me keeps harping on about making sure I seal the bolts correctly when I install it. Question is was the ARC SMIC manufactured with the bolt holes drilled through into the tank? I doubt that any intercooler manufacture would design an intercooler this way.

I work in a place that makes massive radiators and also repairs/services them and intercoolers. When we test them if there are any leaks we get them welded up. Then we test them again etc. Sounds like they stuffed up yours mate and I would send it back and get one that doesn't leak. P.s. I just bought a 600x300x100 (core size) intercooler from ebay. Only $240 to the door and doesn't even get hot :D. No leaks either :no:

I work in a place that makes massive radiators and also repairs/services them and intercoolers. When we test them if there are any leaks we get them welded up. Then we test them again etc. Sounds like they stuffed up yours mate and I would send it back and get one that doesn't leak. P.s. I just bought a 600x300x100 (core size) intercooler from ebay. Only $240 to the door and doesn't even get hot :D. No leaks either :no:

What pressure drop though? :)

Problem is, I was sold an item that was supposedly it great condition and it is obviously not.

The intercooler manufacturer where I have had it tested does not recommend using sealant in the bolt holes due to the possibility that it will come off inside the cooler and enter the engine.

He has recommended drilling out the existing threads and welding in a new section of round bar which can be tapped properly.

To me this sounds like the best and most professional way to rectify the problem.

Back to my original question, There is no way an intercooler manufacturer would intentionally drill there mounting points through into the tank? I gather this is a correct statement.

Of course they are saying that...it makes them money.

Lol at sealent not working...wtf do you think is stopping air leaks in your turbo compressor housing where it bolts to the CHRA.

They are not making any money. They are going to fix pro bono as I know the supervisor there.

And they never said that sealant wouldn't work. Sealant can fix a multitude of problems.

But my question still remains unanswered.

Would ARC make an intercooler that requires you to seal the bolt holes as they are drilled through into the tank?

Mate the easy way out is to put thread sealant (white crap) on the bolts and fit it up. We use the same crap at work for fitting plugs into big steel and copper intercoolers (called aftercoolers but whatever) and they are good to 50 psi. Sounds like someone put bolts into your cooler that were too long and wrecked it. Get it fixed if its free but other than that don't stress :thumbsup:

2 psi less pressure drop than the r34 smic that was on there. I got 2 psi more on the gauge after I fitted it. A mate has the same one on his 45 psi 600hp plus sr20 drag car :thumbsup:

but to answer your question entirely, I haven't measured it

The bolt threads are also stuffed so like Room42 suggested I reckon that the previous owner has used bolts which are too long and has overtightened and stuffed them up.

As the going says don't treat the symptoms fix the cause.

I'll be getting the unit repaired professionally with new bolt stubs installed.

Didn't really get an answer to whether or not intercoolers are manufactured with bolt holes through into the tanks or not but thanks for your help anyway.

at the risk of trying to answer the original question.....I do not know for sure, but I cannot imagine any circumstance where a professional manufacturer would drill open holes through a sealed part of the intake.

sounds much more like dodgy prior installation than original build

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...