Jump to content
SAU Community

Recommended Posts

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yeah gotta get rid of it. Did have a k&n but it rubbed on the bonnet so think I'll just get an apexi. Yeah once my consult arrives I will check timing on start up. Will try and start this arve to see if starts up straight away like yesterday

My CAS was weird. Everything seemed fine but I got random knock every now and then and it was making alot of noise. Pulled it out and you could barely spin it. Car has run much nicer with the new CAS. Having said that, the old one never caused any idle issues but if you can borrow another one its something else you can rule out.

Make sure you set base timing and probably do an ecu reset as well

Just a few things...

Everyone of my RB20s (3 in total) all had a wierd surge/hesitation when coming on boost for the first time when cold - I believe one person had found a fix for it... I seem to think it was CEFFIE (or some similar user id - the guy that does the chips for the rb20 ecus)

but once they are warmish - that issue goes away.

Pod filter - I had a blitz pod filter which mounts on to the AFM - on the RB20, this ALWAYS surged and kinda jerked around.

I then used a different pod on an extension pipe and it worked fine.

see here..

post-343-0-12398600-1338266966_thumb.jpg

Also have awesome sauce box for it..

post-343-0-07834200-1338267017_thumb.jpg

you can have them cheap cheap if you like.

Yeah will check first Cal and then I might grab it off ya if it's the CAS. It started perfect yesterday before I drove it to site. So will try this arve and see. Haha I just finished making a box bugger. So nah thanks for the offer though. Will just go a nice apexi power funnel I think nice and stubby.

My point about the filter was having a free flowing pod right against the afm may be causing the issue as air comes in from all directions.

having a slight extension pipe so the air smoothes out before hitting the AFM might help.

Also, if you have the mesh off the front of the AFM (which helps smooth out air flow) it will also cause problems.

ive also got the same cold start issue as you. will idle rough for a few seconds in the morning and struggle to build oil pressure unless i give it a rev. it doesnt have any other sutters or problems and isnt hard to start. its a 33 n/a . hope you find a solution

Rb20 on stock ecu will feel sluggish until water temp hits 65deg. Baby it until over that temperature. It retards the timing until 65deg. I'll have a look tomorrow morning at the ignition timing value for your own info.

Past week I have been getting rough idle and dropping to the point of nearly stalling. no new mods to cause this change. Cleaned the aac and Iacv and problem still there. I wonder if it could be linked to cold start issue (which I have had prior to this idle issue)

Will clean afm and see if that's fixed at least one problem...

what price u looking at for the filter/pipe set up?

I dunno.. 50 bucks?

I've also got a consult port cable and screen thingy I'd sell..

http://www.skylinesaustralia.com/forums/topic/394910-qld-fs-ecudatascan/page__p__6336586__hl__ecudatascan__fromsearch__1#entry6336586

Might be handy for your trouble shooting

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...