Jump to content
SAU Community

Recommended Posts

Im after a taller diff ratio. Something around the 3.5 ratio or even taller. I have a 3.7 gears here but want to see if I can get something taller before I have it built.

I have heard R33 RB25de auto has a 3.5 diff. Would take the complete centre if someone has one laying around.

  • 2 weeks later...

Gday, I'm after an R32 GTS-t Manual tail shaft in good condition if anyone can help out, must not have shagged centre bearing/carrier bracket thing like they all appear to - Gearbox Yoke not required either.

Also after some good condition genuine R32 GTR front Guards

Send me a message if you can help - Tobbie - 0401 739 292 Thanks!

  • 2 weeks later...
  • 3 weeks later...

WTB urgently, the steel water pipes that bolt to the underside of an RB25 inlet manifold, will pay in parts, cash or alcohol!

Will also buy a whole plenum if its cheap/easier.

SMS on 0408 117 171

could try zoidbergmerc he offered me a plenum a couple of weeks ago,

WTB urgently, the steel water pipes that bolt to the underside of an RB25 inlet manifold, will pay in parts, cash or alcohol!

Will also buy a whole plenum if its cheap/easier.

SMS on 0408 117 171

ah oh well

yeah not bad, took it to rons and he managed to take out the old piece and got midas to make up a new piece, now no leaks :D

so its all good, heaps easier than having to replace the whole thing!

now im just waiting for my thermostat to arrive and then im doing oil, fuel filters before powercruise...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...