Jump to content
SAU Community

Recommended Posts

do you mean the bit the top of the spring sits in and then bolts into the car

i have my 33gtst standard shock/springs rear springs are hks that im not using

one of the studs if thats what its called on a rear one spins freely/ isnt fixed so you cant tighten the nut on it

dunno if it ccan be fixed

just read your other thread, they are what you wnat i just have them all in one piece

Edited by MatthewT85

Genuine Nissan part. 20 or 30 bux I wouldn't bother with second hand.

I brought 3 or 4 in one go for all our boxes cos they were so cheap. If your local Nissan isn't very helpfull I can get you one.

Ok thanks mate, I'll let you know if I can't get one :)

do you mean the bit the top of the spring sits in and then bolts into the car

i have my 33gtst standard shock/springs rear springs are hks that im not using

one of the studs if thats what its called on a rear one spins freely/ isnt fixed so you cant tighten the nut on it

dunno if it ccan be fixed

just read your other thread, they are what you wnat i just have them all in one piece

yeah, only really need the top bits, can't find any info if gtst is the same as gtr

mind if i check them out when i get down?

Want to buy aftermarket dump pipe elbow for a stock turbo'd rb20 or rb25.

Also a stainless steel low mount manifold if someone has one they dont want.

And one more thing, a decent front bar for my 34gtt, or a rough/damaged fibreglass one I can make somthing of.

cheers,

Daniel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...