Jump to content
SAU Community

Recommended Posts

  • Replies 436
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

So is that gospel then? have run a 11.92 previously, hoping to run quicker this time.

Do i need to hook up something or will it get through scrutineering ok?

I wouldnt be to worried about it. Normally at these events you self scrutineer your car anyway. I would just throw a blue triangle on the car just so they know where the islation switch is. I have run an 11.0 and i am meant to have a lot more safety gear in the car than i do have and they have never said anything to me about it. I would be more concerned about an ANDRA licence than the isolation switch. You do have an ANDRA licence dont you? They can probably be purchased on the day but its quite a bit more expensive doing it that way. If you plan on continuing to race the car it would be much cheaper to buy a yearly licence

Bank transfer done.

Emailed entry form.

We may finally have that race Brad (ido09s) :thumbsup:

Oh sweet. Will be good to catch up mate and have that long awaited race :nyaanyaa: How did your car go on E85? Did you make much more power? Ours went backwards according to the rollers hehe

Given the event is only a week away and there is only around 30 competitors.... is it going to go ahead or not? Unless the club makes up for the shortfall in costs i thought that WSID had a minimum of 40 cars, max of 50, for these private hires.

It's all in the first post;

4. Club Execs will be at the entry gate from 830am until 10am to hand out tickets. Get there before 10am to get a ticket, we wont stand there all day as we're there to enjoy the day aswel :)

IDO09S, Aaron (1320ft) has made himself available to be there on the day and can issue the ANDRA licences. I am sure he will post in here to answer any questions.

As usual, I wouldn't be surprised if there were a number of last-minute entries and SAU reached the minimum 40 entries. The track day is booked and it's going ahead...unless the track isn't ready :unsure:

Awesome about Aaron being there :rolleyes: Aaron is pretty fair with running the joint from an ANDRA perspective

I am with you on the track conditions..... have they had a street meet yet to get some rubber down? We might be the first to christen the new surface, which i wont be happy about to be honest :( The new management is doing an awesome job with the place though. Its come ahead in leaps and bounds since the departure of Jim Read

Oh sweet. Will be good to catch up mate and have that long awaited race :nyaanyaa: How did your car go on E85? Did you make much more power? Ours went backwards according to the rollers hehe

Getting tuned, will find out next week mate :whistling:

Edited by petern

Hey fellas, I don't know if WSID will let us run our GoPro's but I have the three for the club up for rent. Is $35 paid on the day. That includes me making DVD copy of the video files and mailing them to you about a week after the event.

PM me for reserving one. First in, best dressed.

I ran mine inside the car and have had no problems.. I Dont think outside the car is allowed..

Entries will be updated shortly, we are closing in on the 40 entrants :)

I always have my gopro hanging from the sunroof inside the car and they havent pulled me up on it so far.

I would like to try it outside the car this time so lets see what they say.

Cars use them on the outside all the time so i doubt they will have any problems with it.

The new management seems to be a bit more laid back than the old management which is good to see as they were pretty hard assed on trivial things previously

If you like Jarrod just send me a PM with all of your details that should be on the form and ill do it for you.. (im thinking you are just using microsoft word viewer not the actual program so you cant edit documents)

This event is absolutely going forward, and it's going to be great :D

There are about 15 spots remaining until we are full, but WSID require us to cut off entries after this weekend.

So get in quickly!

Thats fine, Matt is being paid to cover the event and the agreement I made with him is that he's the only one who will get a Media pass on the day but around the pits or from the stands is no drama.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...