Jump to content
SAU Community

Recommended Posts

I have two surplus blank key fobs, all you need to do is cut the key and pair it to your car following the key programming instructions.

These are old fobs circuits transferred to new shell+blade. I have done this and programmed one set of key to my M35 ARX. The battery voltage checks 3.4v which means its not flat.

The shells are not oem, but looks it. Only thing thats different is the rubber button is slightly lower then the original.

stagea_key_fob3.jpg

stagea_key_fob7.jpg

Key programming

Asking $110 per blank Key FOB - Delivered

I have excess shells+Blade also if anyone wants them.

stagea_key_fob4.jpg

stagea_key_fob4a.jpg

Asking $12 Delivered via standard post.

Link to comment
https://www.sau.com.au/forums/topic/365495-m35-stagea-key-replacement/
Share on other sites

looks like there is still some interests in getting the complete keys - I am in the process of putting more complete refurbed keys together in future for those that missed out. ie just - cut and program - for those that cant be bothered with the legwork/time/waiting/upfront $$$ etc.

Blades are the same profile, just finding the right innards is the hard part.

Will let you know when i have complete sets ready.

  • 2 weeks later...

UPDATE

Hi Guys, the Keys FOBs finally arrived with my other parts.

Same price as before - $110 delivered ( will be sent via registered post ) I have check the battery voltage ( no battery are flat) and made sure that they all had the same part number ( K70206 C9923 0301 ) on the IC.

Hi Rez of IC of remote internal

The black chip is different on all (4144 093 211E) keys last four digits different, and the silver chip ( 31491 E240 ) is the same on all keys. So im guessing the black chip

makes each key unique. The battery side of the remote IC is all the same besides the four digit black marking.

** SIDE Note ** notice other Nissan cars used same shaped keys - not sure about internal or if they have transponders, all I know is that in japan they use 315mhz range for remotes - if you look closely at the IC, you will notice the 3rd button isnt solder on so im guess other keys may be Interchangeable with the Stagea ( wingroad, early Elgrande etc ) - but i dont have the money to find out.***

I can't really test the keys ( crazy for me to pair all the keys to my only car ) - unless someone wants to donate a spare key reciever module. ( happy to pay postage ) Theres no moving parts except for buttons and none of the rubber parts werent ruptured, and any signs of water in the keys. Buttons on the donor keys had your usual normal wear on the buttons.

I only managed to get 7 sets before I ran out of fund$ / those that have used external parties to get yahoo auctions parts do know how expensive it can get when you get carried away - first preference will go to the people listed in this order.

Unless they dont want them no more - I will offer to others if they pass thru.

jidge

tronzstagea x 2

bbenny

joshm35

spoolin12

bigkevracer

If for some reason you can not get your key to pair to your car, please PM me.

in process of sending PM's - will post pics tonight but it looks exactly as the ones in my first post.

Regards

Hue

  • 2 weeks later...

works with the factory option alarm, ie if your car has a sticker and the two ultrasonic detectors ( one on dash and other usually mounted on middle pillar behind driver )

jidge - waiting for funds

tronzstagea x 2 No longer needs them

bbenny

joshm35 - waiting for funds

spoolin12 - Check PM

bigkevracer - No longer needed gone to bbenny mate.

So I have one left.

  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...