Jump to content
SAU Community

Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

These graphs and data are taken from the lap of 1.06.10

Speed by Time graph taken from Drift box GPS data.

speedgraph.jpg

G Force Graph.

Ggraph.jpg

Wake field track map created from GPS positioning.

Trackmapfromgps.jpg

Patrick I ran Pirelli Corsa P-Zeros and was surprised they weren't that much better than street tyres. I need to stump up for some real Semi's now. Well done on a 1.13 that's about what I run in street trim. I gotta lurn to steer betta.

Oh ok, for what i paid i was hoping to see some good times on them, fingers crossed for next event as sunday was just on shitty flat spotted Kumhos on the front and worn down to tread dunlops on the rear..

The Tyrepower place dude 'Mark' told me the Pirellis were less likely to flatspot too due to the greater ability to flex and a thicker sidewall?!

was that just BS or?

Here is a comparison chart between my fastest ever lap (1:12.3) vs JohnP's (1:06.1) with data acquired from our RaceLogic PerformanceBox's.

Obviously im the red line and John is the blue line

Main straight J=210kmh B=160kmh

T1 J=167kmh B=150kmh

T2 J=83kmh B=76kmh

T3 J=114kmh B=114kmh

T4 J=80kmh B=89kmh

T5 J=83kmh B=77kmh

T6 J=110kmh B=110kmh

T7 J=142kmh B=132kmh

T8 J=67kmh B=73kmh

T9 J=108kmh B=108kmh

Back straight J=172kmh B=139kmh

T10 J=55kmh B=60kmh

Enjoy.

post-1296-0-54019600-1307090080_thumb.jpg

Very good data comparison love it, need to get me one of these performance boxes once the new race car is up and running.

So when is the turbo going on the Nascup to get the straight line speed up?

Also anyone want to but buy a Mazda R100 Historic Sports Sedan..... will be on the market next week

  • 3 weeks later...

Just surfing the net and came across this

http://www.renew.asn.au/forum/viewtopic.php?f=2&t=757

Congrats to the winners.

Talk about random, they posted it Posted: "Tue Jun 21, 2011 10:30 pm " I posted the link to it before that time ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...