Jump to content
SAU Community

Recommended Posts

I'm from Knox area, guess meet somewhere along the way

went on the BP website and used store locator there's one on Cooper St, Epping

so maybe meet there and take Hume freeway up and turn off at Goulburn Valley Hwy and follow it up to Shepparton

Corner of Cooper St and Hume Freeway

its about a 2hr drive from there...

So say meet up at 5.30-5.45am for 6am depart?

Here's a map of meet spot

post-60203-0-80348200-1312515722_thumb.png

Let me know if this is a suitable meet point, haven't been up to deca before but have used this BP before for a Winton meet.

If you were thinking of another servo let me know and well work something out

Anyone else driving up Saturday morning feel free to suggest a meet point or come along to this meet point.

  • Replies 244
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Please do not leave later.

Too often people have been arriving 15-20mins before driver briefing starts which doesnt leave enough time to check in, get car prepped/scrutineered etc etc.

If you do this you will miss your first event. There simply isn't enough time to deal with late comers and hold the whole event up as a result.

Should add, I won't be competeing, just pop in for a look - hence my might be come later.

For these who is, arrive there around 8am.

2 Deca's ago you got me lots of drinks cause you got sick of me complaining I was sober lol

I thought it was for all the abusive messages about not turning up for the last deca!

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Hell, I'm sufficiently wary of the ZSS suspension arms, let alone something like a hub.
    • Got it back home and got started pulling the hub off and diagnose the issue. Axle was stuck after removing the 36mm nut so i used a 3 jaw puller to try and push it out and... eH5FXvJ8.mp4   spend the next few hours trying to remove the axle from the remaining hub as it was very much jammed in there when the spindle sheared off. resulting damage as below R53AIy6 - Imgur.mp4   Looks like the was already a stress fracturing in the spindle as can be seen with the darker cracked section My working theory is maybe when the pinion gear exploded last year the shock put through the hub was the initial crack. Then a few events later it finally let go. Just lucky it happened where it did and not 190km/h on the next sweeper or into the hairpin The bearing/hub assembly went in in 2019 and were non-genuine "ZSS" assemblies and no nails were harmed in the process. #BreakHubsNotNails
    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
×
×
  • Create New...