Jump to content
SAU Community

Recommended Posts

OK, didn't want to ever let go of these brakes as they were very hard to source and are pretty much as good as it gets.. I bought the calipers, rotors and pads second hand but were in excellent condition as they were only used for a practice weekend for testing. The calipers were refurbished, this included repainting them, new piston seals, bridge pipe, bleed nipples, heat stickers etc. So they were practically brand new once redone, and still are since I'd be lucky to have done more than 500kms on the street with them, these have not been on the track since I got them on the car....

They were professionally painted by a panelbeater using a custom gold/bronze colour with a matt clear to give them the anodized look. The Alcon logo was painted in navy blue. Brand new Alcon heat stickers were also put on.

The hats and caliper brackets are billet cnc items, made by PWR in QLD who are the Aussie distributor for Alcon. The rear brakes still retain the factory hand brake drum so you can still use the handbrake. Currently on my car at the moment but the car is in storage so they will not get anymore use.

Included in the package is:

FRONTS

- 6 pot monoblock endurance calipers with titanium pistons

- 378MM X 35MM Alcon rotors

- PFC brake pads (30mm thick!!!)

- Billet hats anodized in black

- Billet caliper brackets anodized in black

REARS

- 4 pot monoblock endurance calipers with titanium pistons

- 343MM X 32MM Alcon rotors

- PFC brake pads

- Billet hats with handbrake drum anodized in black

- Billet caliper brackets anodized in black

These brakes are not only better in performance compared to the street Alcon kit PWR sells, but will also last longer as far as rotors and pads go. I found myself changing pads often with my previous Alcon 'street' kit due to the pads being almost half the thickness, these pads being 30mm thick will not get the heat transferred through the whole thickness of the pad and thus will last a lot longer, especially if used in sprints (4-5 laps) as I was using them for. I also went through a set of rotors with the old setup being 32mm thick, these are 35mm thick. So therefore the cost difference between the street kit and the V8 supercar kit I have for sale will deminish over time making these brakes an absolute bargain!!! PWR sell the V8 supercar kit for over $22k new!!!! >_<

Unique Autosports also have them for sale, check the link below:

http://www.nismo.com.au/pricelists/pricelist_braking.htm

OK, here's some pics:

FRONTS:

13012011010.jpg

13012011009-1.jpg

They fit (JUST!!) under 18x10.5 inch ENKEI RPF1's..

11032010242.jpg

Pic of front caliper after re-painting..

27012010156-1.jpg

REARS:

23082010420.jpg

23082010418.jpg

This photo was taken trial fitting before hats were anodized..

13012011016-1.jpg

PRICE: $11K ono

NOTE: These brakes may not fit some 18 inch wheels due to the width of the caliper, especially wheels with big dish due to the spokes sitting close to the centre of the wheel. I found many of the Rays/Volk wheels (TE37, LMGT4, CE28N etc..) will not have any such problems.

Will ship interstate at buyer's cost, PM or reply here if interested.

Brakes located in Narre Warren North, VIC.

Cheers,

Jack

Fark!!!! just bought a full alcon kit for my gtr 2 months ago from PWR would rather put a few extra $$ together and bought these.Great brakes good luck with the sale.

Edited by JGB33

Thanks for the comments guys, they are truly special. Brake p0rn at it's finest!!

Couple more pics...

Rolling shot

PIRAC-9321.jpg

Currently behind some 18 x 10.5 LMGT4's

14022010203.jpg

:cheers:

God you always have Awsome stuff for sale!

So much want, so little need!

Free bump!

Lol, unfortunately don't have the time these days to play around with GTR's so better off let somebody else enjoy the gear that I have accumulated over 10 years.

The car itself will be up for sale shortly aswell, might hang onto it for the SAU Nationals to enjoy it one more time but have only driven it twice this year. :closedeyes:

PMs replied....

Please tell me Aaron got them. I have an almost identical set-the front calipers alone are worth just over half the asking price.

Whoever got them, well done!

Please tell me Aaron got them. I have an almost identical set-the front calipers alone are worth just over half the asking price.

Whoever got them, well done!

Unfortunately no, although he was using everything had to hold back!!!!!

All I can say is that they are going on a time attack GTR, I'm sure you will see this car in the not too distant future.

Apparently the front calipers are worth $5k each brand new!!!!

I'm pretty sure the new owner is chuffed.....

:cheers:

I'm shattered but glad, because for every moment they were available I was trying to work out what I could sell to fund these.

Congrats to the new owner, I'm very jealous :D

:D

Seems like somebody can't wipe their smile off their face!!!! :cheers:

Jack, did your last set of 'blow your load' spec brakes sell? I think you wanted about 7K for them.

Yes mate they are long gone, made their way up to Brisbane just like this set did....

My brake whoring days are over.... For now... :pirate:

Come to think of it, I've gone from:

- Standard Brembos

- then Brembo F50 kit

- then Alcon 'street' kit

- then Alcon 'street' kit with bigger and thicker rotors

- then Alcon V8 super car kit

I think I'm due for some 8 pot mono block endurance Brembos with carbon ceramic rotors...

Maybe NOT..... :thumbsup:

Awww damn... I was even considering buying these off you Jack!! :P I don't even have a GTR to put them on, but I would have found a way to fit them to the S15 :worship: Nevermind.. I am still rather envious though :yes:

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...