Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Common problem, just changed to the shockproof oil a couple of weeks ago and sure enough I have oil coming out of the breather, never had this issue until this oil went in.

Is there a solution to this issue other than changing the oil, seems like a waste of big dollars to dump it for a different brand.

Might try contacting Redline otherwise.

Would be interested to hear what redline have to say about it. By the sounds of it there is something within the oil itself which is causing it to froth up, only solution really is to dump it and get another oil.

That is FALSE - Do not think that extending your breathers will fix the problem.

We extended them higher and longer. It still made it all the way up and 1L would come out on cruise but none on the race track. It was only ever on the way to the race track we would lose that much. It would still lose it in small amounts on the track but not even a fraction in comparison.

They are just avoiding the problem. We moved to a better oil, we no longer have this problem

Hmmm interesting. So what happens when it has "climbed" all the oil out of the box? You have to keep refilling it all the time? Sounds shifty, im still running the oil previously mentioned and have had not 1 drip come out of the breather that i can see.

Edited by joeyta22

Hmmm interesting. So what happens when it has "climbed" all the oil out of the box? You have to keep refilling it all the time? Sounds shifty, im still running the oil previously mentioned and have had not 1 drip come out of the breather that i can see.

Yes, we had to keep pumping it back in. Even when it was 1L down, it would still pump it out up 3M of hose that was half a meter higher than the factory point and spit another half litre out into our bottle

We use Royal Purple 75w85 in all the street car stuff and Royal Purple 85w140 in the race stuff

Or Motul Gear Competition on request

im assuming this is in reference to Max-Gear which is suitable for diffs (75W-90, 75W-140, 85W-140 1quart bottles)

for gearbox i only see Synchromax listed but no info on the weights available

also cant find anything on Max-Gear being suitable for LSD

Syncromax is different

Synchromax® is recommended for manual transmissions that specify an automatic transmission fluid or motor oil. It is also ideal for 4x4 transfer cases and / or 2-cycle and 4-cycle motorcycle gear boxes.

And yes - Max Gear is suitable for LSD

  • 6 months later...

Righto,

fears are confirmed.. THERE IS f**kIN OIL EVERY!!!, seems to only happen on longer trips EG 100km plus.. anyway

the redline light shock proof is absolutly pissing out the breather, not going to risk spending that much money again. Dont really care if it was a bad batch. Going to change to something else..

probably RP or Motul like Elite has recommended

cheers

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...