Jump to content
SAU Community

Recommended Posts

Thanks for your input guys and yeah James that is going to have to be my next option by the looks of it. Already speaking with Harold from PerformanceLub....saw the link from a post you made in 2009?? ..or something I cant remember - i have read that much of info online its uncanny

My first post, however I have spent the last three hours reading this thread.

Such a clean Skyline and it looks amazing. Good job! :)

Cheers man :)

I will be ordering Redline stuff first thing tomorrow. Going to be a bit different and go with 2 litres of lightweight shockproof and 1 litre of superlight so that I get best of both worlds. Hopefully it fixes the issue.

Also.....not the clearest of photographs but the car has come a long way :yes:

compare2_zps85f4bee6.jpg

compare1_zpsbcc23678.jpg

So finally got around to doing the second gearbox oil change two days ago.....

IMAG0203_zpsvclecyhm.jpg

Did it through the shifter hole this time as I now know exactly how much goes in.

IMAG0204_zpsg7crnydc.jpg

RESULTS

First start up and drive around - This was immediately after putting the oil in. Shifted into reverse and first beautifully. Second was still hard to put into and notchy. Got nice and smooth when warm as usual.

Second day of driving - This was on the way back from work this evening. Went into second with a tiny bit of grinding for the first three four shifts. Then felt really good with slight stiffness but no grinding or obstruction.

It seems to be getting better but I refuse to be happy till it gets really good - so I will keep monitoring for a week......thanks to everyone who recommended Redline as you are right so far - it would be easy to say "should have gone with Redline" but then again hindsight is a wonderful thing.

If it's grinding then it's grinding, Redline does not FIX synchro problems it only HIDES synchro problems. You're synchros are stuffed and unfortunately Redline is only a bandaid fix. I run Redline in mine and it did help the problem, but 10 months later and it's gotten worse so the next step is a rebuild or replacement.

Yeah I know.....I am hoping for and if it gets me past xmas I will be a very happie chappie....house deposit time around then so I dont want any big expenses at the moment. Just happy its not prominent anymore to be honest

Okay I am now a Redline fanboy. Has started to really work well and gear changes are a lot smoother than before. Would seriously recommend it to anyone starting to experience gearbox woes.

In other news......had a play with the editing software on my phone

a_zps62b9d135.jpg

  • 2 weeks later...

Wing ---> rear diffuser ---> then racetrack :yes:

No racetrack K-Dawg.......passenger on board !!

Screenshot_2014-10-20-12-00-21_zps0eictk

Have nothing new to report really......I have been slacking off on the car build for now as I am in saving mode but I am still very motivated so there is no need to panic.

Been building random "jap stuff" for myself in the meantime.......all for the big ass garage at the new place !!

Picked up this bit of whiteboard from Bunnings the other day

IMG-20141022-WA0001_1_zpsnvl87cc5.jpg

Got out my paint pens and put my artistic skills (or lack of them - lol) to good use....

NewImage_zps0deefd0e.jpg

Few nails later....ta da....a cool personalized tool storage thingo for my basic tools; which will be mounted on the garage wall !!

IMAG0242_zpspldmybjg.jpg

Looks like a two year old was let loose but ah well....I am proud of it...hahaaa

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...