Jump to content
SAU Community

Recommended Posts

they only take photos of the egine baby and dash with ign on(all lights up)

and under the car from the front.. mine was done at holden when i got this 200.

The pics dont go to Vic roads, only if you get a defect within 30days. Vicroads will only THEN ask for the pictures from the RWC issuer to see how it compares to what they took

He said no photos of engine bay. Just underneath, with 1 wheels off and dash... He made a point about the Hicas and airbag lights cos they flash etc.

RWC checklist:

Remove 2-way diff - Really?

Re-install Hicas - I should have one around somewhere.

Front tie rod ends - Bursons TE926-14

Raise about 1 inch

Re-install steering wheel

Remove exhaust and change - Really?

Change rims

Front fog light not working... I need s2 fog lights if anyone has them. 4 door fog lights seems to be a sealed light.

Take the cluster out, very easy and remove the blubs.

i guess different reasons for a roady mean different pictures..

i took mine for a legit roady to find if there was genuinly something wrong with the car, then he took it for a dodge viper2000.. nice car those are.

pics of bay, dash, and under car from the front.

only because pod, FMIC and s15 Steering wheel..cant see the hicas lock bar from the front in mine, ide assume the same for you.(mines a 34GTR rear diff..

Fark dude you got RWC raped :(

Definitely take the cluster out and pull the bulbs man, it'll be easier than refitting and you'll also need to never worry about it again :)

You shouldnt need to change the diff, thats farked :(

Lets have a working bee to help Billy to the SAU Nats lol

I'm fairly sure exhaust shouldn't need changing for RWC. Always thought it's fine as long it's secured properly and EGT sensor attached, and exhaust noise is EPA related or RW/Vicroads like to screw us lot?

That brings me to a story; Last December i bought a 32 GTR, seller said he had to put stock exhaust in cos the Apexi N1 is too loud to pass RWC, That being said, the system consists of 3" Y pipe, de-cat and stock catback. He then swapped back before I got the car.

Fark dude you got RWC raped :(

Definitely take the cluster out and pull the bulbs man, it'll be easier than refitting and you'll also need to never worry about it again :)

You shouldnt need to change the diff, thats farked :(

Lets have a working bee to help Billy to the SAU Nats lol

I did! I might be changing the diff on Friday night with a mate... I hope.

Sunday working bee anyone? haha

yeh they do have to pass noise to pass a RWC.. but only at the discretion of the RWC issuer.. nothing to do with EPA

What?!

is it 90dB as per EPA or?

Victoria is now a very homosexual state...

Getting Hicas and stock catback from alex.

I was amazed at having to change the diff!! so annoying....

Im just getting the KKR adjustable pillowball tie rod ends

I might have a stock S2 diff you can borrow. Will check tonight.

I would just tell the guy you got the diff reconditioned and it clunks because it is yet to wear in, at least that is what the diff place told you....

What?!

is it 90dB as per EPA or?

Victoria is now a very homosexual state...

as i said, whatever the RWC tester considers quiet.

Straight pipes dont help

lol well yeh

doesnt make sense though seeing as the stock is over EPA limit anyway..

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...