Jump to content
SAU Community

Recommended Posts

No call yet, I'll go to my local cop shop if I haven't heard anything by next week and look into pressing charges so the cocksucker loses his job

you got rammed by the truck or something yeh?

thats f**ked

Cops didn't tell me the name of the company and I only got the rego, couldn't make out the company name on the door as it was only small and the rest of the truck and trailer was plain white...

All I know is it's a company in the sticks...Druin or something?

Never really heard of the place, but I guess if it's small enough it wouldn't be too hard to track the company down. If I can do that then I'll definitely call but I wouldn't expect some freight company in the sticks to have a HR department..

http://www.truelocal.com.au/find/freight-transport/vic/gippsland/drouin/

If it's any of those I'd say it'd be 1 of the first 2, wasn't a cattle truck and wasn't a flat bed which would more than likely be the trailer choice of a crane delivery company...

The fact that they're businesses in bumf**k nowhere means they have no websites (that I could find anyway) so no chance of seeing a picture of their trucks/logos

Do you know the guys name? Will be easy to confirm the company he works for.

I.e. If it's company number 1.

Get someone to call up 'Can I speak to John Sanders' please?. If yes hang up.

Call back in 5 mins. Speak to HR, if there is none, speak to the Directors/Bosses or managers.

Touche'

But thought you chased the truck till he stopped so woulda thought you'd ask to see his licence to get his details etc..

Or did you just pull over after it happened cuz your car was busted lol?

Touche'

But thought you chased the truck till he stopped so woulda thought you'd ask to see his licence to get his details etc..

Or did you just pull over after it happened cuz your car was busted lol?

My car was fine...I pulled off the exit ramp coz it looked like he had finally come to his senses and was pulling over, as I did that he went straight through the lights and back onto the freeway..I was already on the phone to the cops by then

If I did get him to stop, I wouldn't have been asking to see his license, I would've taken it out of his pocket after I KO'd the flamin mongrel though.

Seriously can't even begin to describe how angry I was... and that's without steroids.

My car was fine...I pulled off the exit ramp coz it looked like he had finally come to his senses and was pulling over, as I did that he went straight through the lights and back onto the freeway..I was already on the phone to the cops by then

If I did get him to stop, I wouldn't have been asking to see his license, I would've taken it out of his pocket after I KO'd the flamin mongrel though.

Seriously can't even begin to describe how angry I was... and that's without steroids.

what car were you in?

what car were you in?

My EA...Bull bar on tow bar is the only reason there's no damage...Haven't checked if the bull bar has been pushed in or whatever, doubt it but that'd be the only damage if there was any.

My brother has been talking to a cop mate of his, makes me wanna fucking smash that cunt of a cop as well...They're all stupid cunts

'Is there any damage to your brothers car? If not they must not have collided. Obviously at speed there would be evidence of a collision, paint etc'

So basically you're allowed to go out and ram whoever the f**k you want, just don't do it hard enough to cause any damage or leave any paint and your in the clear. Or slap on an unpainted bull bar, smack a car with a tow bar and you're set.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...