Jump to content
SAU Community

Recommended Posts

200sx that's been sittin in my garage for 3 years.

240 got sold to some guy from Sorrento.

Cage not for sale.

Yeah. It's regarded as an equivalent of a standard nissan turbo, which is legal?

Driven an SR20 with it before, and the response is amashing.

That rule is only for GTR, RWD can only be highflow. Must retain the comp and exhaust housings, well it doesn't go that far, but it is implied.

Standard Turbo Clarification

(RWD Standard Class)

RWD Standard can run any Nissan OEM turbo from any RB (SR) Skyline.

Highflowing of any of these RB (SR) OEM Nissan turbo's is allowed.

(GTR Standard Class)

Any of these turbo's are considered a standard spec replacement turbo and are not considered a turbo mod.

R32, R33, R34 N1's, HKS GT-SS's, Garrett GT2860r-7.

that rule is only for GTR, RWD can only be highflow

wut? if it's equivalent of a stock GTR turbro for GTR's, and you can put any stock RB turbo (gtr, n1, etc) onto a RWD, then doesn't that mean you can put an equivalent of a stock GTR turbo onto a RWD?

GT-SS is same specs as a highflowed T28. FFFUUUU. better cancel the purchase.

What was it like before?

dunno details, you'll have to ask craig, it's his car.

wut? if it's equivalent of a stock GTR turbro for GTR's, and you can put any stock RB turbo (gtr, n1, etc) onto a RWD, then doesn't that mean you can put an equivalent of a stock GTR turbo onto a RWD?

GT-SS is same specs as a highflowed T28. FFFUUUU. better cancel the purchase.

dunno details, you'll have to ask craig, it's his car.

The wording is a bit vague, basically highflow is the limit. My thinking here is the RB's have a ceramic wheel, so when that dies why would you replace with another of the same, thus the highflow.

caus weird shits been going on the last 2 weeks.. was talking about it in fb chat last week and then my neighbour told me on Friday right before I left, that someone was walking around in his backyard a few days earlier..

I was almost certain I'd be coming home to an empty house.

So I've been out late the last cpl Thursday nights and when I get home the (huge) rose bush next to my window has been completely pushed over, stake and all, as if someone's trying to break into the window. I assume the dog barked and scared them off. A cpl days later I'm gone 10mins to get petrol at around 10pm and when I get back, my dog has a bone?! Apparently he was going mental at the gate. To give him a bone you would need to walk around the side of the house to the gate, in the dark and with the cobwebs (do not like at the best of times). Neighbours didn't give him anything.

Tonight I just barely see through a crack in the blinds someone walk quietly past my bedroom window.. not exactly pedestrian thoroughfare... and it was what.. 9pm+. By the time I got out the front there was noone..

Hmm think I've forgotten something but yeah. Freaking me out, jumping at every noise again.

The unknown is scarier than facing them directly.

The wording is a bit vague, basically highflow is the limit. My thinking here is the RB25's have a ceramic wheel, so when that dies why would you replace with another of the same, thus the highflow.

ah well, guess I'll just have to highflow the stockie T28 that's on the car instead.

caus weird shits been going on the last 2 weeks.. was talking about it in fb chat last week and then my neighbour told me on Friday right before I left, that someone was walking around in his backyard a few days earlier..

I was almost certain I'd be coming home to an empty house.

So I've been out late the last cpl Thursday nights and when I get home the (huge) rose bush next to my window has been completely pushed over, stake and all, as if someone's trying to break into the window. I assume the dog barked and scared them off. A cpl days later I'm gone 10mins to get petrol at around 10pm and when I get back, my dog has a bone?! Apparently he was going mental at the gate. To give him a bone you would need to walk around the side of the house to the gate, in the dark and with the cobwebs (do not like at the best of times). Neighbours didn't give him anything.

Tonight I just barely see through a crack in the blinds someone walk quietly past my bedroom window.. not exactly pedestrian thoroughfare... and it was what.. 9pm+. By the time I got out the front there was noone..

Hmm think I've forgotten something but yeah. Freaking me out, jumping at every noise again.

The unknown is scarier than facing them directly.

Holy f**k.

Set up some lights?

yeah well you can get pretty cheap survellance cameras (not sure how good)

but end of the day make sure you have got contents insurance and you sohuld be ok if someone does get in

I do.. and tbh if something was going to happen I would have preferred if it was this weekend while away, caus even the dogs weren't here.. at this point I don't know what they want and that freaks me out more than worrying about stuff getting stolen..

Shit sounds creepy Kaz. Get some sensor lights. And maybe leave a few lights on in the house when you go to sleep.

I'd be more worried about your safety rather than the contents in your house.

Also find something to use to defend yourself with or even see if any friends can sleep over for a bit.

I didnt, but it would be pretty funny seeing it on track

like all the other kakimoto built r33's?

http://ameblo.jp/kakimoto-shop-blog/image-10547046137-10562723191.html

what power are you looking for. just go for a mitsubishi td06 lol 300kw easy hhaha

not really after huge power. more interested in response. besides, anything other than highflow will put me in modified category. then it's just battle of the wallets.

like all the other kakimoto built r33's?

http://ameblo.jp/kak...0562723191.html

not really after huge power. more interested in response. besides, anything other than highflow will put me in modified category. then it's just battle of the wallets.

true. let us know how you go with the highflow? ive got a 2871r in at the moment. super responsive, but i wont see more than 220..

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...