Jump to content
SAU Community

Recommended Posts

no idea man. just got it off the trailer and parked it. gonna pull it under the car port tomorrow arvo and give the interior a good clean/ remove the driver side bride seat. which is f**kn rubbish.

interior work i noticed that needs to be fixed.

replace GTR rear seat with factory 4 door seat

replace bride with GTR driver seat

replace dash, carpets, leather boots, driver side door trim.

exterior

repair front bar.

engine- new engine lol.

expecting this to end up costing a fair bit but im keeping this so meh... didnt pay much for it anyway so cant really go wrong

Nice rims if they are te37s! But these boys will say not enough offset for a Gtr. Cas' car has 18x9.5 +12 and its flush

Not TEs unfortunately, didn't want to spend that much. They are brand new though, and few if any people will have them in Aus.

It's not enough for a gtr, but I have a gtst so should be alright

no idea man. just got it off the trailer and parked it. gonna pull it under the car port tomorrow arvo and give the interior a good clean/ remove the driver side bride seat. which is f**kn rubbish.

interior work i noticed that needs to be fixed.

replace GTR rear seat with factory 4 door seat

replace bride with GTR driver seat

replace dash, carpets, leather boots, driver side door trim.

exterior

repair front bar.

engine- new engine lol.

expecting this to end up costing a fair bit but im keeping this so meh... didnt pay much for it anyway so cant really go wrong

geez that requires a lot of stuff to be replaced,

why didn't you just save for longer and buy a running one, would be cheaper then to get this thing driving

haha birds

guys i didnt do a search, but how hard would it be to get a RWC if i dropped a 25DET into it instead of another 20det?

25det, you'll need engineers cert, means upgrading the brakes while you're at it...

Whats wrong with the motor?

25det, you'll need engineers cert, means upgrading the brakes while you're at it...

Whats wrong with the motor?

No comp in cylinders 5&6

And rb20s are gay.

I'm taking my time with this. So might as well paint the engine bay etc when the 20 is pulled out

Roman, want some period correct wheels for this bitch.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...