Jump to content
SAU Community

Recommended Posts

Can't generalise bike models either, "over-zealous" riders don't really conform to a particular make/model. Car cruises are a bit different if they are organised by an official club too, cause then you have a registered non-profit company that can be held liable for public property damage if people do stupid things. Try suing a FB group lol.

one of the guys from autobarn's cars was nearly stolen at work the other day... (white 34 gt)

some guys came into CHADSTONE (not highpoint) and smashed the window, removed the igition barrel and tried to start it. they failed so they just took everything they could carry. they also stole a black 34 from the same carpark!

this happened just 10 car spaces away from the shop and in a FULL carpark

needless to say i locked my car in our garage and wont be driving it to autobarn anymore!

try drilling them out? if its possible

one is possibly drillable, though one is not as its spinning which means the nut inside the wing is freely moving also, i might give the thread doctor a call tomorrow

Edited by bluejeans

Anybody have/know of someone selling an ECU for an R34 GTR?

Also need a stock frontbar...or I could fix the old one I guess. Looks bad though.

pretty sure Scott has a power fc

finally got my wheels on.

look siiick bro. gotta lower it more though

pics

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...