Jump to content
SAU Community

Recommended Posts

well wildfire is basically napalm,

and napalm is basically petrol + styrofoam and other thickeners, dissolving enough styrofoam into petrol will make it annoyingly sticky and viscous enough to hold on to anything and burn.

if you want it a little more vicious, KNO3 ground fine and suspended into that liquid will provide more oxygen enabling the mix to burn hotter. If you're even more sadistic, sulphur will reduce the ignition temperature, and powdered charcoal will raise the burning point even higher.

the final result is hardly a pretty green but if you're taking part in a riot and need to spread some riot police. there you have it.

substitute KNO3 for ammonium nitrate in the mix and you've got an ANFO bomb. need to calculate stoichiometry if you want exact figures though.

well wildfire is basically napalm,

and napalm is basically petrol + styrofoam and other thickeners, dissolving enough styrofoam into petrol will make it annoyingly sticky and viscous enough to hold on to anything and burn.

if you want it a little more vicious, KNO3 ground fine and suspended into that liquid will provide more oxygen enabling the mix to burn hotter. If you're even more sadistic, sulphur will reduce the ignition temperature, and powdered charcoal will raise the burning point even higher.

the final result is hardly a pretty green but if you're taking part in a riot and need to spread some riot police. there you have it.

substitute KNO3 for ammonium nitrate in the mix and you've got an ANFO bomb. need to calculate stoichiometry if you want exact figures though.

Your such a terrorist lol

Cot dayum

So you can make this

tumblr_m4wutdkKsC1rxv25to4_400.gif

Your BSB and A/c Number so I can make the deposits?

green is from copper, and that effect is from about 100kg of green sparklers.

no more lab open to me. i can tell you how to do it, you can do it yourself.

Back in my day, if you wanted to get back at someone chemically, you'd steal one of their floppy disks, open it up, cover the film in nail polish remover and let them set their computer on fire none the wiser.

you're only 2months older than me.

but how come, when i was getting back at someone chemically, i mixed bleach + hydrochloric acid and chucked into his house.

the technology is too far apart, damn you whites.

You gave him some water and chlorine gas? I don't believe you...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...