Jump to content
SAU Community

Recommended Posts

Actually I have them now, and hair nets to go with them.

Tony remind me b4 committee meeting and I will bring a couple along for u to try out

M

Cheers Martin!

I have a spare open face, just in case the scrutineers knock back the old Doohan Arai as it has a few chips in the paint. And another spare Arai for mates somewhere if you need to borrow one.

As mentioned you can buy helmets pretty cheap now, less than $200 for a good one.

Maybe bring it just in case I get knocked back!

Hopefully the 4000's I got with the new T3 slots will be better, the only issue so far was a little shuddering when red hot at PI, perfect stopping normally though.

I got the new DBA 4000's with the new slots as we'll. Apparently they don't crack as easy, so fingers crossed!

Cheers Martin!

Maybe bring it just in case I get knocked back!

I got the new DBA 4000's with the new slots as we'll. Apparently they don't crack as easy, so fingers crossed!

well sandown park is known as the brake killer. ruined my dba's nicely lol

How can 2 (or 3) manufacturers be bringing out an identical car? Is it the same deal as those toyota/holden things they did years ago?

Probably a stupid question for all you 86 fan boys, but I haven't followed this thing at all..

Toyota and Subaru joined forces to create the new Toyota 86.

Toyota shell / Subaru engine.

Subaru version is the BRZ (Boxer Renaissance Zenith) and Scion is the FR-S.

Scion is a brand produced by Toyota for the North American market to appeal towards the Gen Y consumers.

I got the new DBA 4000's with the new slots as we'll. Apparently they don't crack as easy, so fingers crossed!

They never did crack, people just did not put enough heat cycles through the rotors before tracking it.

Do you know what sort of times you were doing around Sandown on your first time Aaron?

Though your a bit more of a hardcore driver than me

i think 1.35 was the quickest according to the vid on my phone..

first time tracking ever with 217kw or something.

Do you know what sort of times you were doing around Sandown on your first time Aaron? Though your a bit more of a hardcore driver than me

to give an idea my first time out with

168kw

2nd hand crappy hankook tyres

stock suspension

bendix ultimte pads..(they almost made it though the day)

I got a 1.33.8

So you should be shooting for low 30's high 20's

if you ever want to keep people honest about lap times you can find every-one that is registered with natsoft here:

http://www.motorsportzone.com.au/?page=lap_times

to give an idea my first time out with

168kw

2nd hand crappy hankook tyres

stock suspension

bendix ultimte pads..(they almost made it though the day)

I got a 1.33.8

So you should be shooting for low 30's high 20's

if you ever want to keep people honest about lap times you can find every-one that is registered with natsoft here:

http://www.motorsportzone.com.au/?page=lap_times

At least your tyres had a name. Mine were called something like road stone or something haha and you are a much better driver than me. Once again firt time on track ever

i think 1.35 was the quickest according to the vid on my phone..

first time tracking ever with 217kw or something.

That sounds pretty decent :thumbsup:

to give an idea my first time out with

168kw

2nd hand crappy hankook tyres

stock suspension

bendix ultimte pads..(they almost made it though the day)

I got a 1.33.8

So you should be shooting for low 30's high 20's

if you ever want to keep people honest about lap times you can find every-one that is registered with natsoft here:

http://www.motorspor...?page=lap_times

Yeah I don't think I'd be getting close to that.

I wouldn't rate myself as a driver.

I'll be turning down the boost in the R34GT-T to 10psi so should be making about ~170rwkw

Would you be happy to be my driver trainer in the morning :D?

HOWTO: Negotiating higher salary offer - K GO

If your good at what you do, and you can justify the increase then it's easy.

If you've been doing the same crap in the last year and its industry average then good luck!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...