Jump to content
SAU Community

Recommended Posts

where you thinking of mounting i need to mount mine..

Thinking of putting it below drivers seat cos I recall a thread in Victoria about that bracket a bloke made them, just need to find the thread.

Found the thread and PM'd the chap about it.

http://www.skylinesaustralia.com/forums/topic/374312-cams-approved-fire-extinguisher-bracket/page__p__5970836__fromsearch__1#entry5970836

BTW; R32/33/34 seat mounts are the same, except for 34 GT-t.

Found the thread and PM'd the chap about it.

http://www.skylinesaustralia.com/forums/topic/374312-cams-approved-fire-extinguisher-bracket/page__p__5970836__fromsearch__1#entry5970836

BTW; R32/33/34 seat mounts are the same, except for 34 GT-t.

sweet thanks for that..wonder if it will fit on the passenger seat bracket

sweet thanks for that..wonder if it will fit on the passenger seat bracket

No problem. I doubt it'll fit passenger seat brackets off the pictures, you could always PM the chap and ask him nicely.

Samir why are u bothering. Ill just make you one or get Scott to make one, I gave him some alloy that'll work so if u bring your car to his ill just make u one. No point in spending how much he's asking when I can probably make it for a blow job lol

Thinking of putting it below drivers seat cos I recall a thread in Victoria about that bracket a bloke made them, just need to find the thread.

I'm getting round one in white and would like to get Nismo cluster in white like the one in my 1st GTR.

Thanks.

Tony, looking to do just drags and DECA to start off, my cajones aren't big enough!

I just got a bracket made up that connnects to the front passenger seat rail bolts. Only downside is that the seat must be all the way back all the time. Unless you just unbolted it for the street. 2 second job.

Too many. It pretty fkn worked minus going to a single. Car pulls like crazy

Would be intradasting to see it if he brings it out to Sandown

I just got a bracket made up that connnects to the front passenger seat rail bolts. Only downside is that the seat must be all the way back all the time. Unless you just unbolted it for the street. 2 second job.

My aluminium piece also just connects on to the seat bolts. Same with Scotty's im assuming.

But I can put my seat all the way forward without interferance. Just sayin

Would be intradasting to see it if he brings it out to Sandown

My aluminium piece also just connects on to the seat bolts. Same with Scotty's im assuming.

But I can put my seat all the way forward without interferance. Just sayin

Nice. Don't know why mine isn't like that. Either way does the job lol

Would be intradasting to see it if he brings it out to Sandown

My aluminium piece also just connects on to the seat bolts. Same with Scotty's im assuming.

But I can put my seat all the way forward without interferance. Just sayin

I'm trying to force him to, and yeh my seats goes all the way forward with the Scotty's customs one

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...