Jump to content
SAU Community

Recommended Posts

Full licensed from today! and now I plan to never return to victoads for 10 years.

can finally drive my own car :P part of the first batch of Red-P platers

Licence renewals can be done at Auspost now

and jonoe, mine ARE HID's, does it piss you off yet? and sif you can talk with your fkn reverse light lol

Troi oi thang den nay, tao xinh loi.

I meant top bloke HID kits in reflector housings not made for it. lol. Like them civic ricers out there.

Mah reverse light aint even on for more than 1 minute a day. lol.

Licence renewals can be done at Auspost now

you can also just use Bpay. I needed to change address and get a new photo, better to do in 1-hit. did a 10 year renewal, exciting stuff

you can also just use Bpay. I needed to change address and get a new photo, better to do in 1-hit. did a 10 year renewal, exciting stuff

new photos are done at auspost now too

Troi oi thang den nay, tao xinh loi.

lol, let me translate this for you Aaron. I'm sure you'll appreciate me hahaha

'oh ffs this black kid, I'm f'*ing sorry.'

Well something along those lines.....

Troi oi thang den nay, tao xinh loi.

I meant top bloke HID kits in reflector housings not made for it. lol. Like them civic ricers out there.

Mah reverse light aint even on for more than 1 minute a day. lol.

You're a top bloke hid kit in reflectors housings

lol, let me translate this for you Aaron. I'm sure you'll appreciate me hahaha

'oh ffs this black kid, I'm f'*ing sorry.'

Well something along those lines.....

BAHAHHAHAHAHA

Ling ling, you forgot yo bling bling

Poor stu nick, he lives up the road from us now.

jap plates?

What in Thomo?

Nah USA plates

they are the USA ones....

not sure if like

look crap cause too much white

my lights are on during the day if its raining, im in a tunnel, or if the sun is setting behind me. safety thing. but i see no issue with people driving with their lights on. dont tell me it distracts you because they aren't strobes. it just makes you notice the car in question. which is a good thing.

re foglights; unless the owner has them adjusted wrongly, fogs are supposed to spread light low and wide. so they wont be blinding anyone at night. i never understood the issue people have with them

this

However running lights during the day makes no difference, infact it's been said that it causes less accidents due to the reflection of the light from oncoming cars

NT05s pretty grippy!!

480735_10151159519518779_283679759_n.jpg

65113_10151159519738779_464687672_n.jpg

MOAR LOW!!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...