Jump to content
SAU Community

Recommended Posts

why buy from coles for?

also pobably gound fine because fo the parts used :P

probably. well because sometimes i need mince at 2am, and no where else but coles is open.

i normally just get mince from glen waverly, its a nice coarse mince where you can still see the fat.

He is pretty nice. He's just a bit stupid.

And Alvin's a flamin mongrel

lol you'll be happy to know that the guinea cops are gone. i'm a little sad though, having to throw away all those cucumber and cabbage and pumpkin offcuts. the cops loved those.

someone on ford forums just made 471.4rwkw with a intercooler and e85 :D do want

that must have included injectors, lift pump, swirl pot and at least 1 x 044 at a minimum...

but f**k that's rediculous

Only issue i've ever heard of was when some fool had like <1lt in the tank left 400+ rwkw and fanged it around powercruise or something similar leaned out and yeah needed rebuild.

whilst it may be power to weight of a 365rwkw gtst you're forgetting torque :P but yeah awesome for basic 'stage one' mods more than enough power to smash a 10sec hell be close to 9s with that power + the auto.

best thing about it is it's undetectable by popo, intercooler allowed as it's only intake mod (not that you can see it + no need to change standard intake already sweet) ECU standard still as it's just been flashed, no way to tell about fuel pump or injectors only give away would be the smell of e85 if you went that path.

Edited by UNR33L

i am also now looking at some of the cotd stuff... damn you !

and i was just about to sleep too T__T

edit: okay avoided any temptation to buy anything... from cotd anyway luls. now for long awaited sleep time!! except for some reason my room is freaking boiling skjd;adjas

Edited by kaitoukid
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...