Jump to content
SAU Community

Recommended Posts

Vw is far from prestige. Euro maybe? But does not come close to prestige.

They're seriously shit. Sitting their reving their engines like heroes. One of the r36 was doing it with chunks of blue smoke. People were clapping saying its awesome. Wut?

Precisely, but everyone who owns one thinks that they've got themselves a good european car(owing to the fact that VW group owns audi as well so their engines have some similarities) compared to all the other "inferior" japanese "cheaply" made garbage. The look on their faces when you tell them you own a skyline says it all.

Vw's have become the affordable european car and in general people tend to associate a "prestige value" with euro vehicles.

Yeah and they get it apr tuned and lean the shit out of the car to get more power, thinking that it's "hidden" potential only to end up with a ticking time bomb. I love it when they always say "My fuel economy has improved after the tune and I get loads more power! Awesome!"

Hmm had imports most my life and still do, love them to bits. Also have a vw gti infront of my house and I can't exactly see how it's shit or cheaply made. It's far from prestige but it ain't shit either.

And dude the apr tune just leaning the shit out of it to make power. I can see the hatred and all but come on!!!

Hmm had imports most my life and still do, love them to bits. Also have a vw gti infront of my house and I can't exactly see how it's shit or cheaply made. It's far from prestige but it ain't shit either.

And dude the apr tune just leaning the shit out of it to make power. I can see the hatred and all but come on!!!

friend wasnt saying they are shit, he was saying that the engineers do a great job of making cheap components feel nicer/more expensive than they are, but at the end of the day, they are still cheap materials.

friend wasnt saying they are shit, he was saying that the engineers do a great job of making cheap components feel nicer/more expensive than they are, but at the end of the day, they are still cheap materials.

Of course, what manufacturer isn't trying to save money and use cheaper materials, they all do it!! I wasn't aiming my comment directly at you anyway.

Hmm had imports most my life and still do, love them to bits. Also have a vw gti infront of my house and I can't exactly see how it's shit or cheaply made. It's far from prestige but it ain't shit either.

And dude the apr tune just leaning the shit out of it to make power. I can see the hatred and all but come on!!!

The problem is individuals owning a VW as far as those whom I know love to stick their noses in the air and associate it as a "prestige" and therefore better which is generally not the case. In addition to the tuning etc. made to the engine and thinking that they have superior performance/reliability as opposed to japanese cars, assuming that you're not trashing the shit out of your jap car.

Regarding the leaning out thing, it's because they made it readily available and marketed it and made it mainstream, people don't realise the harm they are doing to their cars and take them to a VW service centre which are probably going to use sub-par oils/fluids that are not made for the increase in power obtained from the aggressive tune, not to forget, stock internals.

Anything above 227 hp (not much room to play with) from a stock GTI engine is going to cause problems, APR stage 1 gets you 254 hp, way above the limit for the stock engine. The Audi TTS which has 265 hp has the same 2.0L I4 engine reinforced from factory, if the engineers from Audi thinks that a reinforced engine is required to take that sort of horsepower, what makes you think that APR's claims that they are tuning it within the limits of a stock GTI engine without any reinforcements are true? Furthermore, every 2.0L i4 engine from VW that produces more or equal to 169kw's of power comes with reinforcements made to the internals. I think their engineers know what's good for their own engines and what isn't.

4th paragraph from: http://www.caranddriver.com/reviews/2010-audi-tts-road-test-review highlights the reinforcement of the engine internals from the 2.0L i4 engine to accommodate the increase in power from the tune/turbo upgrade.

But meh, at the end of the day, I just hate it when people judge you for driving a japanese car when they drive a european one. It's not the car, just the driver's that reek of elitism that annoys me :P , and my advice to any potential/current GTI owners, please just keep the engine stock or face reliability issues down the road, unless you're going to reinforce the internals :thumbsup: then go crazy!! :banana:

Edit:

jelly? golf the new civic? :P

SAU has been in people's faces a lot this year I think. not surprising people see what the fuss is

Yes it is xD polo's too are pretty affordable hatches too nowadays (plus it's european :rofl2:) , good for transporting stuff around :yes:

Edited by arcenite
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...