Jump to content
SAU Community

Recommended Posts

In your case fair enough, but in terms of I.T stuff I've got co worker in same role as me, studied some uni computer science course for years only to end up with the same role/pay as me and owing $$,$$$ in hecs lol

Depends on what you want to do, I.T is pretty much all hands on / experience.

Sucks to be that guy. It's the cheapest loan you'll ever get though

I just don't think about mine lol

So need to change mobile phone providers as I wont have reception once i move across.

Have 6 months left of contract @ $60/month with free iphone 4s

6months * $60 = $360 remaining

Called up to cancel contract; they say to end contract it will cost $280 termination fee + $100 handset payment = $380

To cancel early will cost me more than remaining with them for 6 months -__-

They gave me an option to return the phone and have all fee's and handset costs waived.

But then i'll be stuck with no phone...

Could sign up for a new 24mnth contract and get an iphone 5 today but I heard the 5S is only a couple months away

Or buy a cheap phone for $150-$200 until the 5S comes out

Or pay $400 to keep my 4S and sell for $200 when the 5S comes out

Thinking best option may be to pay the $400 and resell once the new 5S comes out :/

Where is Aaron with his telecom connections?

i have an old n97 you can have if you pay for postage, its semi smart but painfully slow by modern standards.

i just upgraded my SGS2 to a HTC one

but would need to factory restore it and i think the samsungs locked to optus, nokia is unlocked.

So need to change mobile phone providers as I wont have reception once i move across.

Have 6 months left of contract @ $60/month with free iphone 4s

6months * $60 = $360 remaining

Called up to cancel contract; they say to end contract it will cost $280 termination fee + $100 handset payment = $380

To cancel early will cost me more than remaining with them for 6 months -__-

They gave me an option to return the phone and have all fee's and handset costs waived.

But then i'll be stuck with no phone...

Could sign up for a new 24mnth contract and get an iphone 5 today but I heard the 5S is only a couple months away

Or buy a cheap phone for $150-$200 until the 5S comes out

Or pay $400 to keep my 4S and sell for $200 when the 5S comes out

Thinking best option may be to pay the $400 and resell once the new 5S comes out :/

Where is Aaron with his telecom connections?

call the telecommunications ombudsman and tell them you have attempted internal dispute resolution however it was not acceptable.

the issue is that you are required to move for work and they can not provide reception.

the ombudsman will accept the complaint and give you a number to call (the telco's external disputes resolution team)

this will cost them $50 (telco)

you then speak to someone and they will just accept to cancel your contract outright and let you keep the handset based SOLELY on commercial reasons.

If you escalate the complaint further and the ombudsman accepts it (which they will in this case), it will then cost them (telco) $500 (which is more than the termination fee)

so for them it's now lose $300 or $500

meerkat.jpg

If you don't believe me ask ay ay ron

call the telecommunications ombudsman and tell them you have attempted internal dispute resolution however it was not acceptable.

the issue is that you are required to move for work and they can not provide reception.

the ombudsman will accept the complaint and give you a number to call (the telco's external disputes resolution team)

this will cost them $50 (telco)

you then speak to someone and they will just accept to cancel your contract outright and let you keep the handset based SOLELY on commercial reasons.

If you escalate the complaint further and the ombudsman accepts it (which they will in this case), it will then cost them (telco) $500 (which is more than the termination fee)

so for them it's now lose $300 or $500

meerkat.jpg

If you don't believe me ask ay ay ron

haha awesome. Thanks for the info.

call the telecommunications ombudsman and tell them you have attempted internal dispute resolution however it was not acceptable.

the issue is that you are required to move for work and they can not provide reception.

the ombudsman will accept the complaint and give you a number to call (the telco's external disputes resolution team)

this will cost them $50 (telco)

you then speak to someone and they will just accept to cancel your contract outright and let you keep the handset based SOLELY on commercial reasons.

If you escalate the complaint further and the ombudsman accepts it (which they will in this case), it will then cost them (telco) $500 (which is more than the termination fee)

so for them it's now lose $300 or $500

meerkat.jpg

If you don't believe me ask ay ay ron

I have a better idea.

CAAAAAASH TRAAAAAAAAIN

timetable done.

one lecture on thurs and fri, if they're close to useless, 4 day weekend come at me.

nice, mine should be fri-mon 4 day weekend though. no moar monday-itis!

What kind of engineering timetable is that?

Son I am disappoint

40 contact hours minimum

double degrees ftw

So need to change mobile phone providers as I wont have reception once i move across.

Have 6 months left of contract @ $60/month with free iphone 4s

6months * $60 = $360 remaining

Called up to cancel contract; they say to end contract it will cost $280 termination fee + $100 handset payment = $380

To cancel early will cost me more than remaining with them for 6 months -__-

They gave me an option to return the phone and have all fee's and handset costs waived.

But then i'll be stuck with no phone...

Could sign up for a new 24mnth contract and get an iphone 5 today but I heard the 5S is only a couple months away

Or buy a cheap phone for $150-$200 until the 5S comes out

Or pay $400 to keep my 4S and sell for $200 when the 5S comes out

Thinking best option may be to pay the $400 and resell once the new 5S comes out :/

Where is Aaron with his telecom connections?

biggest problem i see with all this is you're only considering iphones... :P

Mum's manual Soarer has had some engine issues for a couple of years, since we rebuilt the engine. It was driveable, but ran gutless on and off boost, jolting all over the rev range under WOT etc. I always felt it was running overly rich. We had rebuilt the engine with random forged pistons and rebuilt the turbos too (after an incident involving flood waters).

Got it dyno'd recently - 120rwkw and 5psi (stock is ~8psi) lol. Prolly wiring/sensor issues plus the forged pistons with god knows what compression, untuned. Soarers usually make at least 140-150rwkw stock.

Greddy E-Manage + tune = instant 170rwkw @ 10psi. No exhaust, no cooler, just the ECU and boosted. COMPLETELY different car on and off boost. Has never felt this good since the day we bought it. 1JZ <3 again.

inb4 Hamish still a Soarer

Wasteland brahs quick advice

As I dont know much about stretched tyres or stanceworks or hektik mexican poke and strech

Bought some 9.5inch rims with Achilles 235 crappy tyres on them so lots of stretch.

Need to run these temporarily before I can order some proper 265 tyres.

Max psi for the tyre says 50psi.

What psi should I have the tyres at to minimize chances of the rim rolling off the tyre?

As when I went to the servo one tyre was on low psi and the rim actually came off the tyre 1/2 way

I've put in 36 psi for now.

Safe to go fast around corners with streched tyres or not really?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...