Jump to content
SAU Community

Recommended Posts

Yeah, maybe Saturday or Sunday?

Can grab a steam cleaner for a few hours as well and give the seats a good going over :)Clean off the happy stains

Location of said 'happy' stains?

lol.

I dunno. Never dragged before and ive never done a "burn out" so wouldnt even know how to warm up the tyres. haha hooning does teach you things sometimes

I'd expect under 13 secs (but probably keep getting 2-3 sec 60footers)

Organic clutch? It's not nice to it but it gets you away with minimal wheel spin, revs up to 4-5k and slip the shit out of it though first til about 4k then let it fully grip and shift the rest as normal.

Keeps engine in a decent torque region and isn't a huge sudden wheel spin inducing shock like a clutch dump.

evos not enough torque to torque steer

insert trollface.jpg

this, they dont make much torque (dat 2L 4 banger lyf) but make up for it with short ass gearing.

a stock one has like 300nm, standard modded ones with an upgraded turbo do ~450nm or so

Organic clutch? It's not nice to it but it gets you away with minimal wheel spin, revs up to 4-5k and slip the shit out of it though first til about 4k then let it fully grip and shift the rest as normal.

Keeps engine in a decent torque region and isn't a huge sudden wheel spin inducing shock like a clutch dump.

lol nope. My wheels skip even just trying to drive off at the lights. dat 4-puck clutch plus +100NM @ 2,000rpm in FWD.

i got the kinugawa kit, has worked flawlessly so far.

Noice. Cheapest I see on fleabay is $65 +$30 shipping, though? Kinugawa web I see it for $45 (USD presumably) without shipping. But still relatively cheap, and have read that they are sweet for the purpose as you say (their turbos on the otherhand... lolz)

lol nope. My wheels skip even just trying to drive off at the lights. dat 4-puck clutch plus +100NM @ 2,000rpm in FWD.

:(

the emo launches hard if you do that, as soon as you start slipping the clutch you can hear the turbo start spooling and you are off.

6k clutch dumps are just too violent on the driveline personally, id rather replace a clutch than a gearbox, diff or transfer case.

Noice. Cheapest I see on fleabay is $65 +$30 shipping, though? Kinugawa web I see it for $45 (USD presumably) without shipping. But still relatively cheap, and have read that they are sweet for the purpose as you say (their turbos on the otherhand... lolz)

i got it from ebay, what ever the price was at the time, fast postage and the kit comes with everything required.

their turbos dont seem to be that bad for skylines, for the emos you pretty much want to stick to the high flow stock ones unless chasing big KW numbers as nothing else gives as good response/driving feel.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...