Jump to content
SAU Community

Recommended Posts

awww yeah. got the card working. drivers werent installing so had to force windows to update the default motherboard gpu drivers with the AMD ones and presto. didnt think it was gonna work but bobs your uncle.

The oakwood stuff is reasonably good...and readily available at superepcobahn...comes with cleaner and a conditioner...smells like eucalyptus...or the meguirs stuff is good if you dont like eucalyptus smells...otherwise hit the waxit website there is heaps to choose from or places that sell quality leather furniture or even handbags often stock good stuff too...

  • Like 1

What do they cal bogans in Englands

we dont have bogans.

we have chavs.

this is a chav.

Chav.jpg

note the burberry cap. staple of the chav. also must wear a tracksuit, addidas or kappa. even tho they smoke more rollies than an entire prison.

either as above black rockport boots, or reebok classic trainers. lots of jewlery and a shit wet look hair cut.

usually ssen driving vauxhall nova's renault clios and all fords.

  • Like 1

wouldnt that be a hipster?

cant actually be a real bogan, but tries hard anyway? or wears the stuff ironically?

I don't think anyone would be a bogan ironically...

If you are not actually a bogan, you wouldn't lower yourself

I don't think anyone would be a bogan ironically...

If you are not actually a bogan, you wouldn't lower yourself

give it time.

people thought that about people like me with tattoos, beards etc.

now every kunt trys hard.

Lol..Platts pretty much defines bogan hipster...I mean the beard, the iPhone...mixed with the tattoos The HSV and Peter Jackson's.. other than not wearing skinny leg jeans , You're all over it mate...kudos to you for at least trying to assimilate into our culture though...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...