Jump to content
SAU Community

Recommended Posts

At my parents place, signed into the wifi...9mbit/sec downstairs with the router upstairs... Didn't touch any settings... So seems to be the router at my place...

Will buy the stealth bomber lookin ma'fkr and enjoy the speedz

  • Like 1

Didn't your old laptop work with the router though?

Yeah but thats coz it's old as well, so it works well with the old router telstra gave me... It's wireless G...This card can connect but doesn't work at it's potential with an old router, so a new router should fix it...My parents have a wireless-N router here and it's working fine...was working fine at centercom too...

You are sooooo looking for an excuse to justify the new router loo

Telstra want $216 for their AC router, that porno bad boy is $339....Once I've seen something I want, it's very hard for me to buy a lesser product lol

Not including clapped out fords :P

That was a different time... Things have changed :)

Well let's hope that works :)

It should, but I'll confirm with centercom before I buy it... don't see why it wouldnt though, parents router is N and working fine, the gangster one is AC which is what this card is made for so should be sweet...and no one had to have their nose broken, no walls need repairing

Am losing 1.5v between alternator and battery.

Alternator producing 14v+ but battery ain't seeing more than 12.5v

Weird problem. I'm guessing the lead from alternator-fuse-battery must be leaking?

Car's too old. Sell and buy a maserati

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...