Jump to content
SAU Community

Recommended Posts

Can't generalise bike models either, "over-zealous" riders don't really conform to a particular make/model. Car cruises are a bit different if they are organised by an official club too, cause then you have a registered non-profit company that can be held liable for public property damage if people do stupid things. Try suing a FB group lol.

one of the guys from autobarn's cars was nearly stolen at work the other day... (white 34 gt)

some guys came into CHADSTONE (not highpoint) and smashed the window, removed the igition barrel and tried to start it. they failed so they just took everything they could carry. they also stole a black 34 from the same carpark!

this happened just 10 car spaces away from the shop and in a FULL carpark

needless to say i locked my car in our garage and wont be driving it to autobarn anymore!

try drilling them out? if its possible

one is possibly drillable, though one is not as its spinning which means the nut inside the wing is freely moving also, i might give the thread doctor a call tomorrow

Edited by bluejeans

Anybody have/know of someone selling an ECU for an R34 GTR?

Also need a stock frontbar...or I could fix the old one I guess. Looks bad though.

pretty sure Scott has a power fc

finally got my wheels on.

look siiick bro. gotta lower it more though

pics

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...