Jump to content
SAU Community

R33 Diff In A Ba Falcon?

Charlie4401
 Share

Recommended Posts

Dobz Experienced

Dobz

Posted
Posted

Hi guys can anyone tell me if the R33 diff will fit in a BA falcon?? both being IRS diffs if not will the diff gears fit??

Do you not see the absurdity of your thread?

Just because two cars have IRS it doesn't mean the diffs are designed exactly the same. It's very likely that falcon diffs and r33 diffs are internally and externally different in many ways.

Charlie4401 Community Regular

Charlie4401

Posted
  • Author
Posted

yeah i do know they might not fit thats Y i'm asking... thought some one might know. I'm just trying to find out if the whole IRS will fit or if the centers will swap over???

Do you not see the absurdity of your thread?

Just because two cars have IRS it doesn't mean the diffs are designed exactly the same. It's very likely that falcon diffs and r33 diffs are internally and externally different in many ways.

warps Mentor

warps

Posted
Posted

Guys, be fair

The R33 diff is a common conversion into BA falcons in drag racing and speedway circles. The trick is, that you need to use a front diff out of the GTS4 (NA). This will bolt straight in but you'll then have to convert the Falcon to 4 stud at the back. You'll also need to fit the Skyline steering rack and lock it out, but this has the benefit of giving you adjustable toe on the back of the Falcon. If you're half smart you can put a tee line into your power steering return lines, install a couple of electric solenoid actuated pilot valves and connect this to the unused terminals in the Falcon ECU to give you HICAS (you;ll need to call your local Pirtek dude to make up the hyd lines for you, as the Skyline and Falcon hydraulic fittings are different - Skylines use 1/4" BSPP and Falcon uses 3/8" NPT). Again, a little known fact that Ford played around with HICAS style rear steering, but gave it away as too costly on their budget spec taxis.

True

tridentt150v Grand Master

tridentt150v

Posted
Posted

yep, hotrodders and modifiers do it all the time, but they generally pick on ford 9", chevy 10 bolts, or jaguar diffs etc etc

I even had landcruiser diffs front and back on my Hilux [supercharged 3.8 v6 holden conversion], so it can be done.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
×
×
  • Create New...