Jump to content
SAU Community

Mobil 1 Engine Oil

Namgun

By Namgun,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

Namgun Enthusiast

Namgun

Posted
Posted

Hi guys

I bought some Mobil 1 engine oil yesterday for $70 5.5L approx. Mobil 1 EP 5w-30.

His name is nick.

If you live in Sydney you can pick it up otherwise he can ship them out to you.

I was pretty happy with the price do I thought I'd share it.

He has some racing engine oils too, they are more expensive though.

He stocks other brands as well like royal purple.

You can search Mobil 1 on eBay.com.au or call him on

0405 509 621

Mobil 1 0w-40 is $100 here is Sydney for 5L but he sells 6 quarts I think 5.5L?? Approx for $65

Link to comment
https://www.sau.com.au/forums/topic/386912-mobil-1-engine-oil/
Share on other sites
Namgun Enthusiast

Namgun

Posted
  • Author
Posted

I normally used castrol edge 10w-40 but 5w-30 is the recommended engine oil grade on 350z manual, so I thought I'd give it ago.

Plus on Mobil and castrolegde website the recommended oil for VQ35DE is 5w-30

I'm not an engine oil expert so I just followed the guide lines online as well as the 350z manual.

What are u using At the moment?

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I tried a 5w30 and found it very noisy/tappety. Once I changed to a 10w40 it was much better. I also tried a 20w50 and found the engine sluggish. Whatever works for your engine but I would have thought, in summer especially, a thicker oil is in order.

  • Thanks 1
Stuart McK Collaborator

Stuart McK

Posted
Posted (edited)

With respect to scott, the weather shouldn't make much of a difference as the thermostat should keep the engine temp near consistent all year round?

All very interesting, but had to jump in here. I agree in general terms, but the thermostat controls the flow of the water in/out of the radiator to keep the *water* at a consistent temp. There would normally be a correlation between water and oil temp, but it will depend on your driving style as to how closely they influence each other and for how long. Anyway, as we all probably know, the first digit is the cold start viscosity and the second is the viscosity at the benchmark temp (100C?). Can't help but think it's critical to match the second to whatever Nissan say for the motor and not play with it. The first just depends on whether you live in Cairns or Hobart and what season it is...

Anyway, I can't help but think a 5W-30 would be a nice 'sweet spot' for all-year round. 10W-40 would be better at the height of Summer I suspect though. Anyone experimented like Scotty?

Edited by Stuart McK
R6n350GT Experienced

R6n350GT

Posted
Posted

All very interesting, but had to jump in here. I agree in general terms, but the thermostat controls the flow of the water in/out of the radiator to keep the *water* at a consistent temp. There would normally be a correlation between water and oil temp, but it will depend on your driving style as to how closely they influence each other and for how long. Anyway, as we all probably know, the first digit is the cold start viscosity and the second is the viscosity at the benchmark temp (100C?). Can't help but think it's critical to match the second to whatever Nissan say for the motor and not play with it. The first just depends on whether you live in Cairns or Hobart and what season it is...

Anyway, I can't help but think a 5W-30 would be a nice 'sweet spot' for all-year round. 10W-40 would be better at the height of Summer I suspect though. Anyone experimented like Scotty?

Been using nick for oil since i got my car, his details are in my stick "servicing", and i been using Mobil 1 5W-30. No ticking or anything... Just check it regularly every 2k so make sure your not burning it as its quite thin oil.

I am going FI soon so gonna use thicker oil , oh and the Mobil 1 filter is bigger and better than stock too so hit that up.

sonicii Veteran

sonicii

Posted
Posted

Anyway, as we all probably know, the first digit is the cold start viscosity and the second is the viscosity at the benchmark temp (100C?).

Not exactly.. the 2nd number does specify the viscosity at 100degC, but the first number specifies the coldest pour point of the oil, basically the temperature the oil becomes so think, it can no longer be pumped. Generally the lower the pour point temperature the thinner the oil will be at 'cold engine startup' temperatures, but this isn't actually what the ?W is specifying.

Commsman Veteran

Commsman

Posted
Posted

I don't know about anyone else, but I've never been anywhere where it's -18 C, let alone driven a car there. I think 10W X would be fine for most places in Australia according to the above chart.

I love oil discussions - you guys should read the ones that regularly pop up on the Stagea forum.

sonicii Veteran

sonicii

Posted
Posted

^^ Agreed, 10W-X won't be a problem for almost anywhere in Aust. Personally I would still stick with 5W30, just because Nissan recommend this weight of oil for all temperature ranges, and just suggests heavier oil 'may' be used in warmer climates.

Japan can get some quite hot summers, so it is not like they haven't allowed for warm climates with their recommendations.

Bourbon Boy Community Regular

Bourbon Boy

Posted
Posted (edited)

+1 for Nick... Cant beat his prices. And the Mobile EP models he sells dont even exist here in Aust.

In Australian weather unless you live up in the snowy mountains, the first indicator number 5W or 10W is probably the least of your worries. It wont make much of a difference although I would stick with Nissans reccomendation of 5W-30. You should pay attention to the second number because this will indicate the threshold (or close to) of what temperature the oils viscosity starts to break down.

So if you drive your car hard, then go with the 10W-40 (or higher) as it would be a tougher oil. But this doesnt necessarily mean its better for your engine as thicker oils obviously doesnt flow\move as quick as thinner ones which the VQ35 might need hence Nissans recommendation of 5W-30.

Edited by Bourbon Boy
Bourbon Boy Community Regular

Bourbon Boy

Posted
Posted

Yes, your right... And so am I.

Oil Viscosity deteriorates the higher the temperature.

So the higher value of the 2nd number, the better the viscosity is of that oil at 100 degrees.

Sorry, maybe I went into to it too much. lol :P

sonicii Veteran

sonicii

Posted
Posted

Maybe we are just confusing terms? In my understanding when oil get so hot it starts to break down (deteriorate), it means the oil is failing, it damages the oil and can cause engine damage. I would expect this would be somewhere beyond 200degC..

I am assuming you just mean the oil thins as he heats up? the oil viscosity will continue to reduce as the oil heats beyond 100degC, but I wouldn't classify that as 'deteriorating'.

mosoto Proficient

mosoto

Posted
Posted

A little clarity required here.

The first number is the viscosity when cold i.e at cold start. eg 5 weight or 10 weight. Yes thats what the W is for.

The second number is the viscocity at operating temperature eg 30 weight or 40 weight.

So it depends on how "thick" you want your oil at start up and op temp. depending on environment & driving conditions.

It has absolutely nothing to do with the point where oil breaks down LOL.

mosoto Proficient

mosoto

Posted
Posted (edited)

I'll also let you guys in on a lil secret which has prob been long forgotten.

GW Sougi 6000 if still available is only $80 for 5 litres of pure synthetic and comparable to Royal Purple / Motul etc etc

http://www.skylinesaustralia.com/forums/topic/22458-the-goods-on-oils/page__pid__6169165__st__2460#entry6169165

Edited by mosoto
iamhe77 Grand Master

iamhe77

Posted
Posted

A little clarity required here.

The first number is the viscosity when cold i.e at cold start. eg 5 weight or 10 weight. Yes thats what the W is for.

The second number is the viscocity at operating temperature eg 30 weight or 40 weight.

So it depends on how "thick" you want your oil at start up and op temp. depending on environment & driving conditions.

It has absolutely nothing to do with the point where oil breaks down LOL.

yes.gif

Oh, and the Sougi S6000 is long gone, but I hear a replacement (X-6000 or something) is just becoming available?

Whilst I tried them on my VQ25det, I went through just about everything and felt that 10w40 was the best feeling... and I think I'll leave it there (re: Commsman's comment about oil discussion in the Stagea section rolleyes.gif)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...