Jump to content
SAU Community

Recommended Posts

I feel ripped off reading this :closedeyes:

I thought this was the end result thread lol... Guess we wait 2 more weeks :D

I'm with a few others, not so sure the -9s will hold 28-30psi. They generally always fall over so very keen to see end result

If they dont hold till top end, it will have a big fat meaty midrange :thumbsup: .

i hate to nit pick but 'Eflex' is Caltex's higher % ethanol blend, 70-85

'Flex-fuel' is the ability to run anything from 100% unleaded to 85% (or whatever your highest E%) ethanol. I know you knew what you were referring to, but just to save other people the confusion.

Fantastic to see more people getting in on it though!! More ethanol users the better!! Get on it people!! :D

Ethanol fuels are fantastic for turbos that are maxxed out on 98. On my rb25 with hks gtrs size turbo so ~245rwkw on 98 fuel maxxed out, then I changed to the caltex eflex fuel and made 280rwkw with even more response!

Ethanol fuels work very well on the smaller turbos that appear to be maxxed out on 98. Go for it!

for the people that have done flex fuel setups using decent boost levels

are your 98 or close to maps just done with a lot of timing pulled out or is the boost dependant on ethanol%? assuming any of the ecus support that kind of setup?

boost same, timing varies.

depends how you think of it... i think of it as timing at '0' (rather than negative) for the 98 map, which is then advanced depending on the ethanol %.

different parts of the map obviously vary in how much the timing is advanced but don't worry about the 98 map as i'm assuming that's already been sorted for most people as that's their fuel of choice.

boost same, timing varies.

depends how you think of it... i think of it as timing at '0' (rather than negative) for the 98 map, which is then advanced depending on the ethanol %.

different parts of the map obviously vary in how much the timing is advanced but don't worry about the 98 map as i'm assuming that's already been sorted for most people as that's their fuel of choice.

really? i would have thought the boost would be lower if your e85 % is lower...

e.g. if i have 100% 98 then I'd expect to run 22psi or so... anything higher could possibly cause big problems....

will check with the Tuner tomorrow on this....

evc 6 i set at 21psi i think, 98 or E85, it's all the same :)

we believe the pistons are N1's, so not fully forged (not 100% on this, will have to try and confirm with Midori one day...) so i'm never going to run stratospheric boost and i didn't think running Eflex/E85 will help much in that department anyway.

if we were going with variable boost, then that would have to be controlled via the G4 i'm assuming... i don't know if this requires extra hardware/extra Link kit etc...

and even if we could, i don't know if i would run extra boost on Eflex/E85... why? i've got all the extra timing over 98, in the 400rwkw for pure E85, ~650nm of torque... don't see the point of stressing the engine anymore to be honest... it's not like it's underpowered :banana:

aaah

your situation is different to mine i guess... i got tiny -9s so I want to cram as much boost through them as I can to make the power lol

I just spoke to Chea and he confirmed that my boost will also vary depending on the ethanol percentage in the tank

Boost, Fuel & Timing will all change accordingly to ethanol %

mine is getting a Haltech boost solenoid so the boost will be controlled by the Haltech ECU too

oookkk bit of a hiccup

gave a hit in 2nd and went for 3rd and the gearbox went BANG!

no more 3rd gear :( box is goooonnneee

anyone in sydney have a GTR box for sale??

if i dont get one by the weekend I'm going to have to push the mods back

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...