Jump to content
SAU Community

Recommended Posts

Lads,

Did a search, didnt help me too much. Just quickley, How many k's should one expect to get from a tank of fuel? my old 33 get about 350k's on a tank of 98, but it was pretty modified. justy wondering how the stag goes if its pretty much stock?

cheers adam

Edited by adamskill
Link to comment
https://www.sau.com.au/forums/topic/389211-stagea-fuel-consumption/
Share on other sites

I've got an RS4S with Yellowjackets, cat back, running 10psi, I drive spiritedly but don't flog it (no redline in every gear) and I get 400-420 around town and 500-520 down the highway sitting on 113km/h or there about. Hope that helps.

what are they like to drive? do they 'feel' as big as they look? (no offence intended)

i currently have a wrx wagon. it handles like a go cart, but its pretty heavily modified, and it really no suited to where i currently live. i cant even drive it up our road as its a dirt road on a farm.

looking for somthing that isnt too fragile, but looks the goods and handles/ preforms well, but still tame enought for the mrs to drive and not have to worry about her safety..

We expect around 14L/100km from the fat slug around town with 11L/100km on the highway but a reasonably modified stagea.

My R33 gets around 12-12.5L/100km around town with +280rwkw.

whats that equate to in terms of a full tank of fuel? how big is the fuel tank?

also any idea how different it is for a stck standard model?

My wife loves driving my stagea. I would pick the stagea over an Sti anyday of the week. If you have a heavy foot they will use fuel but considering they are a small 6 in a medium sized car it's expected.

Which model Stagea are you asking about?

From what I have read on here, it would seem that the M35's are generally lighter on fuel than the C34's, but again mostly depends on how it is driven.

I was getting similar numbers to STAG250 when I had my M35 (650-700kms per 70L) but that incorporated a fair bit of highway driving (although not all highway driving).

for my S2 RS4V managing roughly 300-350 out of 40L nd thats with a quarter of a tank left. as i dont like running below that. only engine mods are exhaust, nd boost to 11psi. hoping to get it a little better once i get my new ECU that is in there tuned.

Hi

After only a couple of tank refills I can report I can get around 720km/80l in my Pm35 350rx which equates to around 11l/100km in mostly city/suburban driving. Havent had a chance to get on the open road yet. In comparison, my modded 33 would average 12.5-13l/100km for 63l for the same driving, so Im stoked with its economy. Plus its got lots of torque I reckon. Thats using Shell V-Power in both.

Edited by YEE-HAA

In my 2002 m35 i only gt around 400 around town, 480 open road.

Think my car is running a bit rich, it blows a little bit of black smoke when accelerating and possibly pinging, anyone have any ideas what could be wrong??

any help much apreciated.

In my 2002 m35 i only gt around 400 around town, 480 open road.

Think my car is running a bit rich, it blows a little bit of black smoke when accelerating and possibly pinging, anyone have any ideas what could be wrong??

any help much apreciated.

Clean the AFM, change the plugs and air filter. If its still running rich there will be deeper issues like o2 sensor etc.

In my 2002 m35 i only gt around 400 around town, 480 open road.

Think my car is running a bit rich, it blows a little bit of black smoke when accelerating and possibly pinging, anyone have any ideas what could be wrong??

any help much apreciated.

Are you using the highest grade petrol available? Check to see if you airfilter is cloged?

Clean the AFM, change the plugs and air filter. If its still running rich there will be deeper issues like o2 sensor etc.

There's some excellent new Blitz Panel Filters in the Stagea Classifieds!! :whistling:

Oh, and to stay on tpic. I get around 480 - 500km to the tank suburban driving (very little freeway travel)

Edited by prince_skyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...