Jump to content
SAU Community

Recommended Posts

There is a thing called:

Brake specific fuel consumption (BSFC)

It's a figure to describe how much fuel an engine needs to produce X amounts of power.

http://www.land-and-sea.com/dyno-tech-talk/using_bsfc.htm

There is a calculator on this page ->

http://www.rceng.com/technical.aspx

My (standard) injectors are now at 85% duty cycle, I am making about 330HP at the crank. (running at AFR of 11.7)

The mixture was starting to lean out already, so I have ordered new injectors.

Edited by Torques
  • 2 weeks later...

From my personal experience the standard injectors can hold more than most think. As my 33 gtst is making 393hp@wheels on standard injectors...

For the dyno figure doubters it does 119mph down quarter..

Edited by fragz013

My (standard) injectors are now at 85% duty cycle, I am making about 330HP at the crank. (running at AFR of 11.7) The mixture was starting to lean out already, so I have ordered new injectors.

Hmmm if you are finding that the fuel flow into the engine is levelling off at 85% IDC I'd consider looking at whats supplying fuel to the injectors more than the injectors themselves, personally - what pump is that with?

almost 300 rwkw? doubtful

119mph isn't a bad trap speed though, to be fair... though in saying that when you are limited by small injectors you can still make a car quite a bit faster than many would expect doing sneaky wee tricks. At lower rpm you have a longer pulse period, so you can actually move more fuel with an equivalent duty cycle.

As an example - I've tuned a Silvia running a G4 Link & boost control but still on stock injectors was quite held back, hitting 85% at 7000rpm at the boost level we were setting it up for. That boost level just wasn't going to do the setup justice, so I set up a "tapering" boost curve which resulted in a boost level some 6-7psi higher at 4500rpm than at redline and progessively dropping down... but injector duty cycles still never went over 85%. The resulting change in how the car performs is VERY substantial, torque wins races and hp sells cars?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...