Jump to content
SAU Community

Recommended Posts

mods: PowerFC, GTX3071R Garret, 0.6 cpm Cover, 0.82 IW, 23psi, Sard 555s, 3inch turbo back exhaust, Greddy type24 600x276x76mm FMIC, new Split Fires with HKS twin power, NGK BCRP7ES 1.1mm plugs, Water Methanol injection, 375ml min nozzle, Pomcams, electric fan & water pump

fuel: Shell optimax

power: no dyno, butt dyno +300rwkw @23psi

oil: Shell Helix 5w40 fully synthetic

useage: daily use

lifespan: 200rwkw - 6years, 275rwkw - 3years, +300rwkw @21psi - 1 year (<2000km). +300rwkw @24psi - 2 weeks

failure: Conrod number 1 smashed 3months ago.

comments: I did all works & tuning myself. Knock never exceed 25knock counts.

definitely no pinging. last time i checked with Yavus, the knock was 40-50knocks and it was fine and when hit about 100 then you can hear the ping. Also with my car, i have never seen knock over 10 when startup. Not all engine have the same knock reading.

When i add 2 degree advance, the knock will go straight up to 80-100 and you can hear the pinping.

would the pinging snapped the rod, and all the pistons are perfectly fine. Also on cylinder 1 i have allowed 1%more fuel.

The reason i posted here just to show that anything more than 300rwkw and 7500rpm is not safe, just a matter of time depending on the condition of the engine. 7000rpm limit would probably live longer. I have already prepared for this to happen and i decided to increase the power to see where the stocky can take me.

Don't flame me, i just wanna share info. :yes:

That's what i thought, high rev with the power level, the rod just let go. like i said pistons are fine, not a scratch.

Also i have allowed piston 1 and 6 with extra fuel (1% & 2% respectively).

After running WMI for last few years, the pistons are all clean, no carbon build up what so ever.

As entering the freeway, on 2nd gear on full throttle and went bang. I'm pretty sure i didn't hit the rev, it was more like about 5000rpm.

Mods: Usual crap and gt35r@26psi.

Power: ? Plenty more than 300rwkw.

Fuel: BP98

Oil: Some full synth crap.

Usage: Drove it to work and cruised on the weekend. Saw 7k rpm every day of the week.

Lifespan: Not long enough.

Failure: Was tuning in the passenger seat with the missus driving. Was fine the day before and the day it broke it was leaning out a bit. Didn't have much fuel in the tank...Either that or the fuel pump wasn't keeping up. Third gear pulls down the road from 80 kph. By the time I saw 13:1, yelled stop and she got off it, it went over 15:1 at full boost around 5k rpm. It was like this...brrrrrr, pshhhh, crackle pshh crackle pshh crackle, BANG! Popped off the intercooler pipe. Put the pipe back on, started it and there was blowby from one cylinder. Drove it home. Stripped it down a few weeks later. Broken ringland in number 2. Bearings still good, bores still have hone marks, no signs of detonation. Only broke from the leanout. Could have lasted ages or not...

Lucky it broke or I would have never built the forged 2530 that is currently getting machined. Should be in the car by next weekend.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...