Jump to content
SAU Community

Recommended Posts

In-car video showing the 34 boosting hard on full boost or its not true? Nah man but Im sure we would all love to see

When I get the boost controller sorted and I can

Find an appropriate "private road" or track :yes:

At the moment I haven't kept the throttle down long enough to enjoy, once it starts getting loose in 3rd I back off... Need better rubber for sure

ku36 tyres arent that bad, what width are they on the rear?

265.... Either KU36, RS-Rs or Achillies 123s.... Just cheapies as they won't last long anyway :D

don't waste your $$$ on KU36

they are pretty decent for what they are but kuhmo have increased their price in the last 12 months and you can get Nittio NT05's or Federal RSR for less.

imho for a street car go with the Nitto's or if you can stretch the wallet grab some advan AD08's

I usually run the NT05's all round and with my suspension setup they give me effortless traction in 2nd right up to about 310rwkw (e85 on 16psi) - beyond that i need to think about what i'm doing

don't waste your $$$ on KU36

they are pretty decent for what they are but kuhmo have increased their price in the last 12 months and you can get Nittio NT05's or Federal RSR for less.

imho for a street car go with the Nitto's or if you can stretch the wallet grab some advan AD08's

I usually run the NT05's all round and with my suspension setup they give me effortless traction in 2nd right up to about 310rwkw (e85 on 16psi) - beyond that i need to think about what i'm doing

+1 for AD08's, great tyre. Once they get the heat into them they are awesome

I'm using 265/35R18 RS-R's on the back and they only just manage to grip 2nd with 280rwkw and a toight like a toiga diff (shimmed).

Have you tried them out at Barbs dude? I found my KU36's are ok on the street, but they really come alive when you get some heat into them on the track.

Thanks mate... Will hopefully get it sorted before Texi...

360kw was the highest run... It was run @ 357kw on the final tune for safety... The reason for the different power figures is the 3 boost levels and also the % of ethanol.... My power ranges from 311kw to 357kw depending in boost and E content :)

Hope that makes sense?

Do you have a dyno sheet, or did I miss it ?

don't waste your $$$ on KU36

they are pretty decent for what they are but kuhmo have increased their price in the last 12 months and you can get Nittio NT05's or Federal RSR for less.

imho for a street car go with the Nitto's or if you can stretch the wallet grab some advan AD08's

I usually run the NT05's all round and with my suspension setup they give me effortless traction in 2nd right up to about 310rwkw (e85 on 16psi) - beyond that i need to think about what i'm doing

Don't KU36s last longer than RSR though? I know RSR is a more grippy tyre but they really don't last.

Edited by Rolls

Do you have a dyno sheet, or did I miss it ?

Don't KU36s last longer than RSR though? I know RSR is a more grippy tyre but they really don't last.

The KU36's have a treadwear of 180, the RSR's are 140. So not a huge difference. I know my KU36's lasted about 1 track day and maybe 8000km's, so they don't last either.

The KU36's have a treadwear of 180, the RSR's are 140. So not a huge difference. I know my KU36's lasted about 1 track day and maybe 8000km's, so they don't last either.

What type of driving would that be, around a track ?

would they last longer with normal street driving and occasional short blasts?

What type of driving would that be, around a track ?

would they last longer with normal street driving and occasional short blasts?

I drove it hard at the track and spun out on a couple of occasions, so I have no doubt that took off a fair chunk of life. But I only got in 10, maybe 12 laps. On the street I drive pretty sedately with the odd 1st, 2nd, 3rd bursts. So they don't last very long, but no doubt without the track abuse they would last longer.

I think you'll find that if you don't destroy the compound on the tyres by tracking them hard, doing skids, etc. etc. then they would last a fair bit longer. But I'd be surprised if you got more than 15-20k km's out of them.

I have KU 36 on the front, but they sat for 2 years so maybe hard now? They gripped real well compared to other tyres.... Was happy with them. I have some shit sumitomo or something on the rear hence why I have no grip....

Rolls - sorry mate, I have 4 dyno sheets, just haven't had time to scan them.... I have 98 sheet, gate pressure E85 vs 98, low boost E85 vs 98 and then just high boost on E85.... Will get them

In here and in the RB 25 thread soon.... Sorry over been slack :)

When I get the boost controller sorted and I can

Find an appropriate "private road" or track :yes:

At the moment I haven't kept the throttle down long enough to enjoy, once it starts getting loose in 3rd I back off... Need better rubber for sure

Oh dont be soft mate thats when it just starts getting fun when ya doing 130km/h in 3rd and the rears start breaking loose :nyaanyaa: (even though they are only nankangs) lol Looking forward to checking your setup out at texi next weekend dude sounds like a sweet setup :banana: Hoping my big brakes are gunna be on my car by then too and possibly some semis lol

Haha come say g'day and have a look :) plumb back and low boost will be like light beer through a straw.... But, what can you do :(

For sure dude I might have to wind down the boost too im a track/witches hat amatuer so see how i go lol :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...